diff --git a/docs/source/docs/quick-start/quick-install.md b/docs/source/docs/quick-start/quick-install.md
index 236a30cbd..7b30a65a5 100644
--- a/docs/source/docs/quick-start/quick-install.md
+++ b/docs/source/docs/quick-start/quick-install.md
@@ -18,11 +18,11 @@ For installing on non-supported devices {ref}`see. <docs/advanced-installation/s
 | Limelight 2          | photonvision-{version}-linuxarm64_limelight2.img.xz  | photonvision-{version}-linuxarm64.jar |
 | Limelight 3          | photonvision-{version}-linuxarm64_limelight3.img.xz  | photonvision-{version}-linuxarm64.jar |
 
-:::{warning}
-Balena Etcher 1.18.11 is a known working version. Other versions may cause issues such as bootlooping (the system will repeatedly boot and restart) when imaging your device.
-:::
+Use the [Raspberry Pi Imager](https://www.raspberrypi.com/software/) to flash the image onto the coprocessors microSD card. Select the downloaded `.img.xz` file, select your microSD card, and flash.
 
-Use the 1.18.11 version of [Balena Etcher](https://github.com/balena-io/etcher/releases/tag/v1.18.11) to flash the image onto the coprocessors micro sd card. Select the downloaded `.img.xz` file, select your microSD card, and flash.
+:::{warning}
+Balena Etcher can also be used, but historically has had issues such as bootlooping (the system will repeatedly boot and restart) when imaging your device. Use at your own risk.
+:::
 
 Limelights have a different installation processes. Simply connect the limelight to your computer using the proper usb cable. Select the compute module. If it doesn’t show up after 30s try using another USB port, initialization may take a while. If prompted, install the recommended missing drivers. Select the image, and flash.
 
@@ -31,8 +31,3 @@ Unless otherwise noted in release notes or if updating from the prior years vers
 :::{note}
 Limelight 2, 2+, and 3 will need a [custom hardware config file](https://github.com/PhotonVision/photonvision/tree/main/docs/source/docs/advanced-installation/sw_install/files) for lighting to work. Currently only limelight 2 and 2+ files are available.
 :::
-
-:::{note}
-Raspberry Pi installations may also use the [Raspberry Pi Imager](https://www.raspberrypi.com/software/) to flash the image.
-
-:::