diff --git a/docs/source/docs/hardware/selecting-hardware.md b/docs/source/docs/hardware/selecting-hardware.md index 138bd48e1..81c09948c 100644 --- a/docs/source/docs/hardware/selecting-hardware.md +++ b/docs/source/docs/hardware/selecting-hardware.md @@ -1,5 +1,10 @@ # Selecting Hardware +:::{note} +It is highly recommended that you read the {ref}`quick start guide`, and use the hardware recommended there that +is not touched on here. +::: + In order to use PhotonVision, you need a coprocessor and a camera. Other than the recommended hardware found in the {ref}`quick start guide`, this page will help you select hardware that should work for photonvision even though it is not supported/recommended. ## Choosing a Coprocessor diff --git a/docs/source/docs/quick-start/common-setups.md b/docs/source/docs/quick-start/common-setups.md index ed8e72b64..888e27082 100644 --- a/docs/source/docs/quick-start/common-setups.md +++ b/docs/source/docs/quick-start/common-setups.md @@ -13,6 +13,11 @@ The Orange Pi 5 is the only currently supported device for object detection. ## SD Cards +:::{important} +It is highly recommended that you use an industrial micro SD card, as they offer far greater protection against corruption from improper shutdowns, like most cards +face every time the robot is turned off. +::: + - 8GB or larger micro SD card - Many teams have found that an industrial micro sd card are much more stable in competition. One example is the SanDisk industrial 16GB micro SD card.