Also reworks OV9782 defaults. Probably doesn't work on windows. We should hide these sliders probably.
Co-authored-by: Cameron (3539) <theforgelover@gmail.com>
Sliders for exposure and brightness would spam messages on the backend.
This used to cause crashes and can cause it to get quite laggy /
delayed. This will add a 20ms debounce which won't send the value to the
backend until the value hasn't changed for 20ms.
---------
Co-authored-by: Matt <matthew.morley.ca@gmail.com>
This PR changes the way that photonvision interacts with nmcli to control networking on the coprocessor. Instead of modifying an existing connection, Photonvision adds new connections for DHCP and Static IP configurations. It then activiates the proper one at startup and any time that the network configuration is changed.
It also now uses the interface name and not the connection name and checks that the interface is available before making any changes. If the saved interface is not found, it updates the stored interface name and applies the network settings to the current interface. This should minimize the failure to control the network if the network interface wasn't available when PhotonVision first booted.
One other benefit of not altering the default configuration is that, if PhotonVision fails to run for any reason, the device can be accessed using the original networking configuration.
The code has been tested on an OrangePi5 and and a Raspberry Pi 4.
Addresses: #1261
Rotate camera calibration coefficients based on camera rotation. Probably. Seems to work. Maybe.
---------
Co-authored-by: Matt <matthew.morley.ca@gmail.com>
There are no settings for solvePNPEnabled while in driver mode but the
UI tries to set it. Let us not do that.
Fixes#1377
Co-authored-by: Chris Gerth <gerth2@users.noreply.github.com>
Chrome prints an error to the console when you have `<img src="null" />`
The path `//:0` can be used for an empty image and Chrome will not raise
an error.
This PR is for part 1 of #1354. It focuses on adding a model selection
interface for models that exist in `photonvision_config/models/`. Upon
completion we can ship more than 1 model and users could upload their
own through `ssh` without deleting the shipped model. This PR also adds
the abstractions need to support more DNN backends (say OpenCV, or RPI
AI Kit)
Up next is adding a CRUD interface for managing models through the UI.
Fixes the following issues with the client log viewer:
- Inconsistent and excessive spacing between log entries
- Lack of responsiveness to window size or scaling
Adds the following features to the log viewer:
- Auto-scroll if scrolled to the bottom
- Ability to clear logs on button click
- Search function to filter logs
- Displays the time the frontend captured a log and displays that timestamp in hh::mm::ss in the log viewer
- Allows logs to be filtered to be after a certain time
- General styling refinements to increase usability
---------
Co-authored-by: Sriman Achanta <68172138+srimanachanta@users.noreply.github.com>
Uses logic in
https://github.com/PhotonVision/photon-libcamera-gl-driver/pull/16 to
push the ov9281 down to its true minimum exposure.
Updates UI to list the exposure settings in ~~microseconds.~~ Native
units - not everyone works in microseconds.
Does its darndest to actually try to set the exposure in
~~microseconds.~~ Native Units. To do this...
Lifecam is funky when doing this - [cscore limits the exposure settings
to certain quantized
values](https://github.com/wpilibsuite/allwpilib/blob/main/cscore/src/main/native/linux/UsbCameraImpl.cpp#L129).
Add a new camera quirk to allow that.
~~Updated camera quirks to re-evaluate every camera load (rather than
recalling from settings - this shouldn't be necessary)~~ This should be
rolled back, needed for arducam type selection.
Updated camera quirk matching logic to make PID/VID optional, and
basename optional (and only match trailing characters). This enables
mirroring CSCore's logic for identifying lifecams by name.
Updated the USBCamera to primarily use cscore's exposed property names.
Since camera manufacturers use a potpourri of names for the same
thing....
For nice-to-have settings: new soft-set logic to try all possible names,
but gracefully pass if the property isn't there.
For required settings: Search a list for the first setting that's
supported, fail if none are supported.
More logging of camera properties to help debug.
Note: most of this work is because cscore doesn't directly expose a
massaged exposure-setting-absolute API (and, given what we've seen,
probably _shouldn't_, this struggle is not for the faint of heart).
---------
Co-authored-by: Matt <matthew.morley.ca@gmail.com>
Reverts PhotonVision/photonvision#1375
Causes white screen UI Bug, "the way we currently strap everything with
vue2 and vuetify has a lot of footguns in it, and using a newer package
manager where each subdependency gets its own version of node is causing
incorrect dependency resolution which also means we can't fix this
without either updating node or patching those dependencies id say just
revert the PR for now until I or someone else can do the vue3 update"
Pnpm is like npm except instead of keeping multiple copies of
dependencies, it shares a single copy for multiple dependencies
significantly reducing build time and the space needed to hold all the
dependencies. Read [here](https://pnpm.io/motivation) for more info.
This changes our CI to use pnpm and allows developers to choose to use
pnpm instead of npm. Also, pnpm has a built-in node version manager so
devs no longer need to use nvm to work on photonvision. All npm
functionality (including photon-server gradle tasks) still functions
using npm so this isn't breaking. We should make a docs change to
suggest to use pnpm.
The OV9782 camera has a specific exposure range, so a camera quirk for
it needs to exist. The default white balance is also pretty bad, so it
must be adjusted.
Closes#1204
---------
Co-authored-by: Matt <matthew.morley.ca@gmail.com>
Co-authored-by: Cameron (3539) <theforgelover@gmail.com>
Add support for the old opencv charuco board like calibio.
Add support for other tag families while calibrating.
Fix calibration issue index out of range with charuco missing points.
Add charuco calibration to photonvision. Currently does not support generating custom charuco boards. This does not support https://calib.io/pages/camera-calibration-pattern-generator. Currently only supports the 4X4_50 family. Also removes all dotboard calibration. Fixes using the lowest possible fps while doing calibration (now uses the highest fps available for each resolution).
Fixes bug where switching tabs/etc causes buildup of connected mjpg streams in network, eventually slowing down streams and causing stream failure until refresh. Accomplishes this by directly setting the source of stream elements to null before unmount, allowing chrome/edge to close the connection.
Fixes#1106
* Disable camera orientation option when camera is calibrated.
* Flip logic on if camera is calibrated when disabling camera orientation rotation
* Add comment on why orientation is disabled when camera is calibrated
* Add v banner warning regarding rotating calibrated camera bug
* Run lint
---------
Co-authored-by: Matt <matthew.morley.ca@gmail.com>
Our current code matches cameras in this order (which I think is objectively wrong and stupid)
- by-id (/dev/v4l/by-id/product-string)
- by path (/dev/videoN)
- product string/name, but ascii only
- asks cscore to reconnect to cameras using `path`, which on linux is actually /dev/videoN. This isn't guaranteed to stick to a camera if you replug them weirdly at runtime.
This is silly and does not consider the actual physical usb port. I propose instead, in this order:
- By physical usb port path and base name
- by physical usb port path and USB VID/PID
- By base name only (with a toggle switch to disable this, and create a new VisionModule instead)
- Give cscore /dev/video/by-path on Linux systems, pinning Photon USBCameras to a particular usb port once created.
This changes lots of things so stay paranoid!
* Sort object detection results and reduce code dup.
* Filter objdet results by ratio and area
* Address code review
---------
Co-authored-by: Mohammad Durrani <46766905+mdurrani808@users.noreply.github.com>
* commented controls that should depend on networkingIsDisabled
* add the thing
* fix Manage Device Networking showing disabled
* commented controls that should depend on networkingIsDisabled
* add the thing
* fix Manage Device Networking showing disabled
* Hide the settings that aren't available when networking is disabled
* Update NetworkingCard.vue
* Update NetworkingCard.vue
---------
Co-authored-by: Sriman Achanta <68172138+srimanachanta@users.noreply.github.com>
Tested on Orange Pi 5 and Cool Pi 4B. Merge with parts of the OpenCV DNN PR.
Adds support for YOLOv5s models for Rockchip CPUs with a NPU. Right now hard coded to a note model from alex_idk. Very much still incubating and largely untested.
Previously, if someone were changing network or camera settings while the backend sent an update request, the frontend wouldn't update the UI until the HTTP request was sent, likely leading to an error or confusion, now, values will be reset whenever new settings are sent. It also checks that settings were changed before allowing the user to click the save button.
* Serialize all calibration data
* Run lint
* typing nit
* fix code
* move these tables around some
* Add cool formatting
* add request to get snapshots by resolution and camera
* re-enable all resolutions
* add wip so i can change computers (SQUASH ME AND KILL ME AHHHH)
* Get everything working but viewing snapshots
* Update RequestHandler.java
* Update CameraCalibrationInfoCard.vue
* Update CameraCalibrationInfoCard.vue
* add observation viewer
* round
* fix illiegal import
* Swap to PNG and serialize insolution
* move import/export buttons TO THE TOP
* Update WebsocketDataTypes.ts
* Add snapshotname to observation
* Refactor to serialize snapshot image itself
* Run lint
* Use new base64 image data in info card
* Update SettingTypes.ts
* Create calibration json -> mrcal converter script
* Update calibrationUtils.py
* Fix calibrate NPEs in teest
* Run lint
* Always run cornersubpix
* Update CameraCalibrationInfoCard.vue
Update CameraCalibrationInfoCard.vue
* Update OpenCVHelp.java
* Update OpenCVHelp.java
* Replace test mode camera JSONs
* Run wpiformat
* Revert intrinsics but keep other data
* Remove misc comments
* Rename JsonMat->JsonImageMat and add calobject_warp
* Update Server.java
* Rename cameraExtrinsics to distCoeffs
* fix typing issues
* use util methods
* Formatting fixes
* fix styling
* move to devTools
* remove unneeded or unused imports
* Remove fixed-right css
If its really that big of a deal, we can add it back later, kind of a drag to fix rn.
* Create util method
* Remove extra legacy calibration things
---------
Co-authored-by: Sriman Achanta <68172138+srimanachanta@users.noreply.github.com>
