Currently, there is a difficult-to-reproduce bug where the backend reports that camera calibration was successful in logs via the logger but then throws an exception causing the backend to return a 500 error code with no request body which causes the frontend to interpret this as a failed calibration attempt. This ultimately leads to the entire instance of photonvision crashing and requiring the entire pi to be restarted. It is believed this issue resides inside the ConfigManager's saving action following the calibration update but is not confirmed.
* Add UI-side changes for invertable hue slider
* Add hue inverted range
* Add new slider backgrounds to threshold tab
* Run spotless
* Updated libpicam.so to artifact built from commit c458bab87740 in that repo on gerth2's pi.
* undo the java-side hack since isVCSMSupported is fixed
* Hook up hue inversion frontend to backend and UI tweaks
* Remove unused .flipped class
* Fix hueInverted name in Vue.js store
Co-authored-by: Declan Freeman-Gleason <declanfreemangleason@gmail.com>
Co-authored-by: Matt <matthew.morley.ca@gmail.com>
Co-authored-by: Chris Gerth <chrisgerth010592@gmail.com>
* Fixup colored shape backend code
* More colored shape stuff
* Start adding shape change to drawing
* Mostly works!
* Add powercell image for shape test mode
* Make super-duper-sure to release stuff
Fixes colored shape leak
* Move approx poly dp into Contour
* Adjust epsilon threshold
* Add dialog to change pipeline type
* Run spotless
* Make yes red :>
* Move "no" button
* Fix duplication/deletion name logic and switching
* Fix compilation errors from rebase
* Update VisionSourceManager.java
* Update type dialog, remove duplicate popup
The dropdown still switches even if the user says "no" tho
Co-authored-by: Banks Troutman <btrout.dhrs@gmail.com>
* Add native stuff
* use runtimeloader
* add more native methods
* more stuff
* Switch JNI methods to static
* Remove non-java classes from the picam jni
* Add gradle task for JNI generation
* Migrate my previous GPU accel work
* Initial work on defining JNI interface
* Change libpicam to a symlink for now
* Initial work on adding no-copy OMX GPU accel on the pi
* Make DIRECT_OMX GPU accel mode not crash
* Clean up OMX changes (still not getting valid data back)
* Re-add GPU unit test
* A couple debugging tweaks/notes
* Add temporary special cases to get RGB out of ProcessingMode.NONE
* Code clarity improvements; fix possible VBO bug
* Get DIRECT_OMX working
* Remove some debugging switches in GPUAccelerator
* Pipe in VCSM stuff to read out pixels FAST
* Apply Spotless
* Revert versioningHelper changes
* Add missing import
* Convert to MMAL and move everything to native
* Re-add shared object
* Rework to use MMAL and do everything natively
* Condense pipeline settings classes
* Add OutputStreamPipeline
* Apply spotless
* Fix duplicate variable inits and add more video modes
* Integrate color frames and latency measurements for GPU
* Fix camera detection on pi and other platforms
* Add proper color copy disabling and camera settings calls
* Fix things that were broken by rebase
* Fix spotless issues and remove uneeded prints
* Remove libpicam symlink
* Fix stream resolution limiting
* Remove testing code in GPUAcceleratedHSVPipe
* Make profiling options general to all computers
* Make PicamJNI load from resources
* run spotlessApply
* Address review comments
* Update Maven repo for JOGL
* Fix release race condition
* Only run GPU accel test on the pi
* Lint fix and merge conflict accident fixes
* Make Jackson ignore extra fields when unmarshalling HardwareConfig
* Fix Mat releasing data race
* Spotless apply
* Remove broken header generation task
* Fix shared library loading typo
* Add a ZeroCopyPicam quirk to allow setting gain with the MMAL backend
* Make sure that exposure/brightness/gain get set after res changes
* Make rawInputMat properly local
* Remove bogus set of shouldRun flag
* Clean up small GPUHSVPipe print
* Add in some things that missed the ZeroCopyPiCameraSource rename
* Fix incorrect scoping introduced in past rebase
* Don't filter out too-low resolutions
* Only show latency when GPU accel is enabled
* Don't free Mats in stream thread before we use them
* Fix use-after-free and latency caluclation bugs on USB camera source
* Update libpicam
* Remove unwanted print
* Add libpicam forceLoad in unit test
* Fix streaming during camera calibration
* Fix zerocopy Picam calculation
* Use logger trace method instead of raw prints
* Fix calibration and driver mode pipes with the Picam
Co-authored-by: Matt <matthew.morley.ca@gmail.com>
Co-authored-by: Banks Troutman <btrout.dhrs@gmail.com>
* Rework settings page; touch up contour, output, and 3D tabs; font sizing
No stream placeholder; driver mode refined; cameras page
Make settings snackbar work
Lint fix
Fix settings page padding
Actually hide settings fields if unsupported
* Make toggle buttons less confusing; fix driver toggle; form validation
* Make eyedropper work and make input/select styling more consistent
* Fix color picker and tabbing bugs
* Set up camera and settings pages to talk to the backend
* Add auto reconnect
* Add lots of tooltips and improve related thematic consistency
* Only show output stream while color picking
* Unbreak robot offset
* Increase tooltip delay and refactor tooltip label into a component
* Remove toggle button switching behavior
* Fix PnP tab and add a flag to disable FOV configuration
* Move FPS indicator
* Make GPU acceleration status use one value in the store
* Only allow IPv4 static IPs and remove accidentally committed index
* Did some stuff
* Fix gradle, start implementing mjpeg frame consumer
* Did some stuff
* bade changes
* rename camera config to USBCameraConfiguration, add name
* unrename cameraconfiguration
* Add pub/sub framework
* Add setResolution to mjpeg frame consumer
* add NTDataConsumer
* Add some totally broken hsv hacks
* Start refactoring UI data
* Update index.js
* Commit and push, he says
* Fix up some errors
* Fix input tab
* Fix fps
* Update index.js
* Add pipeline field setting, update PipelineManager, fix nullpointers and USBCameraSettables
* Change v-model to point to data()
* update hsv to use mutations
* Work on saving, fix hsv
* Rename shouldErode/shouldDilate to erode and dilate
* Hook all the tabs up to the Store
* Change handleData to handlePipelineData
* camera quirk redo, add ICCSub to SocketHandler
* Fix some property names
* Fixed tons of naming in UI, fix backend for multi-val PSCs, fix PSC enums
* change pipeline type to an int in store
* Fix mutation naming
* Attempt threshold fix
* Update SocketHandler.java
* Add truthy data sending
* Start adding logging support
* [UI] Add delay to slider input boxes (#1)
* [UI] [Backend] potentially fix camera settings, various logging tweaks
* Don't release raw input mat
* add setVideoModeIndex to vision settables
* Implement pipeline index in socket handler, add framework for renaming/changing pipes
* (ish) get pipeline change working
* Create index.html
* Cleanups, fix pipeline index bug, fix stream res for MJPG, add dashboard stream (unused)
* Refactor UI to use mutatePipeline, send pipeline results
* Update NetworkConfig.java
* Change double to number
* Run spotless
* Fix reversal of large/small comparators
* Fix left/right
* Fix pitch/yaw calculation bug, fix area bug
* Use Vue.set instead of assignment
This fixes {{ }}
* Update App.vue
* run spotless
* Actually add pipelines and reassign indecies
* Delete old pipeline configs
Fixes duplication on renaming pipeline
* Start working on deleting pipes
* Fix camera nickname change
* run spotless
* Fix some test stuff
* Update VisionModuleManagerTest.java
* vision source manager test is still broken
* Fix VisionSourceManager test
* Apply spotless 2 electric boogaloo
Co-authored-by: Banks Troutman <btrout.dhrs@gmail.com>
Co-authored-by: Declan Freeman-Gleason <declanfreemangleason@gmail.com>
Co-authored-by: Aaryan Agrawal <54345060+13Ducks@users.noreply.github.com>
* Rebrand UI and increase responsiveness
* Fix typo in PipelineViews and SettingsViews directory name
* Inset FPS indicator in stream preview
* Rebrand favicon
