UI would say that every camera on a Pi device was a CSI camera basically. It would not let you rotate usb cameras 90 degrees or 270 degrees because it thought that they were CSI cameras. Fixes: #1098
* Record standard deviations for multi-tag pose
* Add XYZ translation and angle to stdev uI
* create multitag result buffer in store
allows results to be stored in the background
* simplify logic in targeting tab
also adds a reset button
* Formatting fixes
* convert rad angles to deg
---------
Co-authored-by: Sriman Achanta <68172138+srimanachanta@users.noreply.github.com>
- Aruco pipeline now infers tag width from tag family like the AprilTag pipeline
- Removes unused Aruco and 200mm AprilTag models
- `VisionEstimation.estimateCamPosePNP()` now requires a target model instead of assuming 16h5
- Multitarget pipeline similarly infers target model of tag family now
- `PhotonPoseEstimator` can have target model set for on-rio multitarget
---------
Co-authored-by: amquake <noleetarrr@gmail.com>
- Fixes ArUco on picam
- Adds `ArucoPoseEstimatorPipe` for single-tag pose estimation
- Previously, `Aruco.estimatePoseSingleMarkers()` was used for tag pose estimation. This uses the default `SOLVEPNP_ITERATIVE` solver and I believe the method is removed in opencv 4.8. The `SOLVEPNP_IPPE_SQUARE` solver implemented is more appropriate for markers.
- Pipeline architecture cleanup
- Re-enables ArUco pipeline in UI
- Multi-tag support
ArUco detector support is still considered experimental at this time. This should enable a baseline of support for initial testing, but expect some quirks to remain across platforms.
closes#965
Had to disable the eslint rule that was causing the bug.
Disallows disabling driver mode when there are no other pipelines to swap to
Also adds icons for saving and canceling name edits
Adds the option to create a new pipeline in driver mode if there are no other pipelines
Adds disable prop to the driver mode switch on the camera settings page
