allwpilib/robotpyExamples/StateSpaceFlywheelSysId/robot.py

#!/usr/bin/env python3
#
# Copyright (c) FIRST and other WPILib contributors.
# Open Source Software; you can modify and/or share it under the terms of
# the WPILib BSD license file in the root directory of this project.
#

import math
import wpilib
import wpimath
import wpimath.units

kMotorPort = 0
kEncoderAChannel = 0
kEncoderBChannel = 1
kJoystickPort = 0
kSpinupRadPerSec = wpimath.units.rotationsPerMinuteToRadiansPerSecond(500.0)

# Volts per (radian per second)
kFlywheelKv = 0.023

# Volts per (radian per second squared)
kFlywheelKa = 0.001


class MyRobot(wpilib.TimedRobot):
    """
    This is a sample program to demonstrate how to use a state-space controller to control a
    flywheel.
    """

    def __init__(self) -> None:
        super().__init__()

        # The plant holds a state-space model of our flywheel. This system has the following properties:
        #
        # States: [velocity], in radians per second.
        # Inputs (what we can "put in"): [voltage], in volts.
        # Outputs (what we can measure): [velocity], in radians per second.
        #
        # The Kv and Ka constants are found using the SysID tool.
        self.flywheelPlant = wpimath.Models.flywheelFromSysId(kFlywheelKv, kFlywheelKa)

        # The observer fuses our encoder data and voltage inputs to reject noise.
        self.observer = wpimath.KalmanFilter_1_1_1(
            self.flywheelPlant,
            (3,),  # How accurate we think our model is
            (0.01,),  # How accurate we think our encoder data is
            0.020,
        )

        # A LQR uses feedback to create voltage commands.
        self.controller = wpimath.LinearQuadraticRegulator_1_1(
            self.flywheelPlant,
            (8,),  # Velocity error tolerance
            (12,),  # Control effort (voltage) tolerance
            0.020,
        )

        # The state-space loop combines a controller, observer, feedforward and plant for easy control.
        self.loop = wpimath.LinearSystemLoop_1_1_1(
            self.flywheelPlant, self.controller, self.observer, 12.0, 0.020
        )

        # An encoder set up to measure flywheel velocity in radians per second.
        self.encoder = wpilib.Encoder(kEncoderAChannel, kEncoderBChannel)

        self.motor = wpilib.PWMSparkMax(kMotorPort)

        # A joystick to read the trigger from.
        self.joystick = wpilib.Joystick(kJoystickPort)

        # We go 2 pi radians per 4096 clicks.
        self.encoder.setDistancePerPulse(math.tau / 4096)

    def teleopInit(self) -> None:
        self.loop.reset([self.encoder.getRate()])

    def teleopPeriodic(self) -> None:
        # Sets the target velocity of our flywheel. This is similar to setting the setpoint of a
        # PID controller.
        if self.joystick.getTriggerPressed():
            # We just pressed the trigger, so let's set our next reference
            self.loop.setNextR([kSpinupRadPerSec])

        elif self.joystick.getTriggerReleased():
            # We just released the trigger, so let's spin down
            self.loop.setNextR([0])

        # Correct our Kalman filter's state vector estimate with encoder data.
        self.loop.correct([self.encoder.getRate()])

        # Update our LQR to generate new voltage commands and use the voltages to predict the next
        # state with out Kalman filter.
        self.loop.predict(0.020)

        # Send the new calculated voltage to the motors.
        # voltage = duty cycle * battery voltage, so
        # duty cycle = voltage / battery voltage
        nextVoltage = self.loop.U(0)
        self.motor.setVoltage(nextVoltage)