allwpilib/wpilibc/wpilibC++Devices/src/Encoder.cpp

/*----------------------------------------------------------------------------*/
/* Copyright (c) FIRST 2008. All Rights Reserved.							  */
/* Open Source Software - may be modified and shared by FRC teams. The code   */
/* must be accompanied by the FIRST BSD license file in $(WIND_BASE)/WPILib.  */
/*----------------------------------------------------------------------------*/

#include "Encoder.h"
#include "DigitalInput.h"
//#include "NetworkCommunication/UsageReporting.h"
#include "Resource.h"
#include "WPIErrors.h"
#include "LiveWindow/LiveWindow.h"

/**
 * Common initialization code for Encoders.
 * This code allocates resources for Encoders and is common to all constructors.
 *
 * The counter will start counting immediately.
 *
 * @param reverseDirection If true, counts down instead of up (this is all relative)
 * @param encodingType either k1X, k2X, or k4X to indicate 1X, 2X or 4X decoding. If 4X is
 * selected, then an encoder FPGA object is used and the returned counts will be 4x the encoder
 * spec'd value since all rising and falling edges are counted. If 1X or 2X are selected then
 * a counter object will be used and the returned value will either exactly match the spec'd count
 * or be double (2x) the spec'd count.
 */
void Encoder::InitEncoder(bool reverseDirection, EncodingType encodingType)
{
	m_table = NULL;
	m_encodingType = encodingType;
	m_index = 0;
	switch (encodingType)
	{
		case k4X:
		{
			m_encodingScale = 4;
			if (m_aSource->StatusIsFatal())
			{
				CloneError(m_aSource);
				return;
			}
			if (m_bSource->StatusIsFatal())
			{
				CloneError(m_bSource);
				return;
			}
			int32_t status = 0;
			m_encoder =  initializeEncoder(m_aSource->GetModuleForRouting(), m_aSource->GetChannelForRouting(),
										   m_aSource->GetAnalogTriggerForRouting(),
										   m_bSource->GetModuleForRouting(), m_bSource->GetChannelForRouting(),
										   m_bSource->GetAnalogTriggerForRouting(),
										   reverseDirection, &m_index, &status);
			  wpi_setErrorWithContext(status, getHALErrorMessage(status));
			m_counter = NULL;
			SetMaxPeriod(.5);
			break;
		}
		case k1X:
		case k2X:
		{
			m_encodingScale = encodingType == k1X ? 1 : 2;
			m_counter = new Counter(m_encodingType, m_aSource, m_bSource, reverseDirection);
			m_index = m_counter->GetFPGAIndex();
			break;
		}
		default:
			wpi_setErrorWithContext(-1, "Invalid encodingType argument");
			break;
	}
	m_distancePerPulse = 1.0;
	m_pidSource = kDistance;

	HALReport(HALUsageReporting::kResourceType_Encoder, m_index, encodingType);
	LiveWindow::GetInstance()->AddSensor("Encoder", m_aSource->GetChannelForRouting(), this);
}

/**
 * Encoder constructor.
 * Construct a Encoder given a and b channels.
 *
 * The counter will start counting immediately.
 *
 * @param aChannel The a channel DIO channel. 0-9 are on-board, 10-25 are on the MXP port
 * @param bChannel The b channel DIO channel. 0-9 are on-board, 10-25 are on the MXP port
 * @param reverseDirection represents the orientation of the encoder and inverts the output values
 * if necessary so forward represents positive values.
 * @param encodingType either k1X, k2X, or k4X to indicate 1X, 2X or 4X decoding. If 4X is
 * selected, then an encoder FPGA object is used and the returned counts will be 4x the encoder
 * spec'd value since all rising and falling edges are counted. If 1X or 2X are selected then
 * a counter object will be used and the returned value will either exactly match the spec'd count
 * or be double (2x) the spec'd count.
 */
Encoder::Encoder(uint32_t aChannel, uint32_t bChannel, bool reverseDirection, EncodingType encodingType) :
	m_encoder(NULL),
	m_counter(NULL)
{
	m_aSource = new DigitalInput(aChannel);
	m_bSource = new DigitalInput(bChannel);
	InitEncoder(reverseDirection, encodingType);
	m_allocatedASource = true;
	m_allocatedBSource = true;
}

/**
 * Encoder constructor.
 * Construct a Encoder given a and b channels as digital inputs. This is used in the case
 * where the digital inputs are shared. The Encoder class will not allocate the digital inputs
 * and assume that they already are counted.
 *
 * The counter will start counting immediately.
 *
 * @param aSource The source that should be used for the a channel.
 * @param bSource the source that should be used for the b channel.
 * @param reverseDirection represents the orientation of the encoder and inverts the output values
 * if necessary so forward represents positive values.
 * @param encodingType either k1X, k2X, or k4X to indicate 1X, 2X or 4X decoding. If 4X is
 * selected, then an encoder FPGA object is used and the returned counts will be 4x the encoder
 * spec'd value since all rising and falling edges are counted. If 1X or 2X are selected then
 * a counter object will be used and the returned value will either exactly match the spec'd count
 * or be double (2x) the spec'd count.
 */
Encoder::Encoder(DigitalSource *aSource, DigitalSource *bSource, bool reverseDirection, EncodingType encodingType) :
	m_encoder(NULL),
	m_counter(NULL)
{
	m_aSource = aSource;
	m_bSource = bSource;
	m_allocatedASource = false;
	m_allocatedBSource = false;
	if (m_aSource == NULL || m_bSource == NULL)
		wpi_setWPIError(NullParameter);
	else
		InitEncoder(reverseDirection, encodingType);
}

/**
 * Encoder constructor.
 * Construct a Encoder given a and b channels as digital inputs. This is used in the case
 * where the digital inputs are shared. The Encoder class will not allocate the digital inputs
 * and assume that they already are counted.
 *
 * The counter will start counting immediately.
 *
 * @param aSource The source that should be used for the a channel.
 * @param bSource the source that should be used for the b channel.
 * @param reverseDirection represents the orientation of the encoder and inverts the output values
 * if necessary so forward represents positive values.
 * @param encodingType either k1X, k2X, or k4X to indicate 1X, 2X or 4X decoding. If 4X is
 * selected, then an encoder FPGA object is used and the returned counts will be 4x the encoder
 * spec'd value since all rising and falling edges are counted. If 1X or 2X are selected then
 * a counter object will be used and the returned value will either exactly match the spec'd count
 * or be double (2x) the spec'd count.
 */
Encoder::Encoder(DigitalSource &aSource, DigitalSource &bSource, bool reverseDirection, EncodingType encodingType) :
	m_encoder(NULL),
	m_counter(NULL)
{
	m_aSource = &aSource;
	m_bSource = &bSource;
	m_allocatedASource = false;
	m_allocatedBSource = false;
	InitEncoder(reverseDirection, encodingType);
}

/**
 * Free the resources for an Encoder.
 * Frees the FPGA resources associated with an Encoder.
 */
Encoder::~Encoder()
{
	if (m_allocatedASource) delete m_aSource;
	if (m_allocatedBSource) delete m_bSource;
	if (m_counter)
	{
		delete m_counter;
	}
	else
	{
	  	int32_t status = 0;
		freeEncoder(m_encoder, &status);
		wpi_setErrorWithContext(status, getHALErrorMessage(status));
	}
}

/**
 * The encoding scale factor 1x, 2x, or 4x, per the requested encodingType.
 * Used to divide raw edge counts down to spec'd counts.
 */
int32_t Encoder::GetEncodingScale() { return m_encodingScale; }

/**
 * Gets the raw value from the encoder.
 * The raw value is the actual count unscaled by the 1x, 2x, or 4x scale
 * factor.
 * @return Current raw count from the encoder
 */
int32_t Encoder::GetRaw()
{
	if (StatusIsFatal()) return 0;
	int32_t value;
	if (m_counter)
		value = m_counter->Get();
	else
	{
		int32_t status = 0;
		value = getEncoder(m_encoder, &status);
		wpi_setErrorWithContext(status, getHALErrorMessage(status));
	}
	return value;
}

/**
 * Gets the current count.
 * Returns the current count on the Encoder.
 * This method compensates for the decoding type.
 *
 * @return Current count from the Encoder adjusted for the 1x, 2x, or 4x scale factor.
 */
int32_t Encoder::Get()
{
	if (StatusIsFatal()) return 0;
	return (int32_t) (GetRaw() * DecodingScaleFactor());
}

/**
 * Reset the Encoder distance to zero.
 * Resets the current count to zero on the encoder.
 */
void Encoder::Reset()
{
	if (StatusIsFatal()) return;
	if (m_counter)
		m_counter->Reset();
	else
	{
		int32_t status = 0;
		resetEncoder(m_encoder, &status);
		wpi_setErrorWithContext(status, getHALErrorMessage(status));
	}
}

/**
 * Returns the period of the most recent pulse.
 * Returns the period of the most recent Encoder pulse in seconds.
 * This method compensates for the decoding type.
 *
 * @deprecated Use GetRate() in favor of this method.  This returns unscaled periods and GetRate() scales using value from SetDistancePerPulse().
 *
 * @return Period in seconds of the most recent pulse.
 */
double Encoder::GetPeriod()
{
	if (StatusIsFatal()) return 0.0;
	if (m_counter)
	{
		return m_counter->GetPeriod() / DecodingScaleFactor();
	}
	else
	{
		int32_t status = 0;
		double period = getEncoderPeriod(m_encoder, &status);
		wpi_setErrorWithContext(status, getHALErrorMessage(status));
		return period;
	}

}

/**
 * Sets the maximum period for stopped detection.
 * Sets the value that represents the maximum period of the Encoder before it will assume
 * that the attached device is stopped. This timeout allows users to determine if the wheels or
 * other shaft has stopped rotating.
 * This method compensates for the decoding type.
 *
 * @deprecated Use SetMinRate() in favor of this method.  This takes unscaled periods and SetMinRate() scales using value from SetDistancePerPulse().
 *
 * @param maxPeriod The maximum time between rising and falling edges before the FPGA will
 * report the device stopped. This is expressed in seconds.
 */
void Encoder::SetMaxPeriod(double maxPeriod)
{
	if (StatusIsFatal()) return;
	if (m_counter)
	{
		m_counter->SetMaxPeriod(maxPeriod * DecodingScaleFactor());
	}
	else
	{
		int32_t status = 0;
		setEncoderMaxPeriod(m_encoder, maxPeriod, &status);
		wpi_setErrorWithContext(status, getHALErrorMessage(status));
	}
}

/**
 * Determine if the encoder is stopped.
 * Using the MaxPeriod value, a boolean is returned that is true if the encoder is considered
 * stopped and false if it is still moving. A stopped encoder is one where the most recent pulse
 * width exceeds the MaxPeriod.
 * @return True if the encoder is considered stopped.
 */
bool Encoder::GetStopped()
{
	if (StatusIsFatal()) return true;
	if (m_counter)
	{
		return m_counter->GetStopped();
	}
	else
	{
		int32_t status = 0;
		bool value = getEncoderStopped(m_encoder, &status);
		wpi_setErrorWithContext(status, getHALErrorMessage(status));
		return value;
	}
}

/**
 * The last direction the encoder value changed.
 * @return The last direction the encoder value changed.
 */
bool Encoder::GetDirection()
{
	if (StatusIsFatal()) return false;
	if (m_counter)
	{
		return m_counter->GetDirection();
	}
	else
	{
		int32_t status = 0;
		bool value = getEncoderDirection(m_encoder, &status);
		wpi_setErrorWithContext(status, getHALErrorMessage(status));
		return value;
	}
}

/**
 * The scale needed to convert a raw counter value into a number of encoder pulses.
 */
double Encoder::DecodingScaleFactor()
{
	if (StatusIsFatal()) return 0.0;
	switch (m_encodingType)
	{
	case k1X:
		return 1.0;
	case k2X:
		return 0.5;
	case k4X:
		return 0.25;
	default:
		return 0.0;
	}
}

/**
 * Get the distance the robot has driven since the last reset.
 *
 * @return The distance driven since the last reset as scaled by the value from SetDistancePerPulse().
 */
double Encoder::GetDistance()
{
	if (StatusIsFatal()) return 0.0;
	return GetRaw() * DecodingScaleFactor() * m_distancePerPulse;
}

/**
 * Get the current rate of the encoder.
 * Units are distance per second as scaled by the value from SetDistancePerPulse().
 *
 * @return The current rate of the encoder.
 */
double Encoder::GetRate()
{
	if (StatusIsFatal()) return 0.0;
	return (m_distancePerPulse / GetPeriod());
}

/**
 * Set the minimum rate of the device before the hardware reports it stopped.
 *
 * @param minRate The minimum rate.  The units are in distance per second as scaled by the value from SetDistancePerPulse().
 */
void Encoder::SetMinRate(double minRate)
{
	if (StatusIsFatal()) return;
	SetMaxPeriod(m_distancePerPulse / minRate);
}

/**
 * Set the distance per pulse for this encoder.
 * This sets the multiplier used to determine the distance driven based on the count value
 * from the encoder.
 * Do not include the decoding type in this scale.  The library already compensates for the decoding type.
 * Set this value based on the encoder's rated Pulses per Revolution and
 * factor in gearing reductions following the encoder shaft.
 * This distance can be in any units you like, linear or angular.
 *
 * @param distancePerPulse The scale factor that will be used to convert pulses to useful units.
 */
void Encoder::SetDistancePerPulse(double distancePerPulse)
{
	if (StatusIsFatal()) return;
	m_distancePerPulse = distancePerPulse;
}

/**
 * Set the direction sensing for this encoder.
 * This sets the direction sensing on the encoder so that it could count in the correct
 * software direction regardless of the mounting.
 * @param reverseDirection true if the encoder direction should be reversed
 */
void Encoder::SetReverseDirection(bool reverseDirection)
{
	if (StatusIsFatal()) return;
	if (m_counter)
	{
		m_counter->SetReverseDirection(reverseDirection);
	}
	else
	{
		int32_t status = 0;
		setEncoderReverseDirection(m_encoder, reverseDirection, &status);
		wpi_setErrorWithContext(status, getHALErrorMessage(status));
	}
}


/**
 * Set the Samples to Average which specifies the number of samples of the timer to
 * average when calculating the period. Perform averaging to account for
 * mechanical imperfections or as oversampling to increase resolution.
 * @param samplesToAverage The number of samples to average from 1 to 127.
 */
void Encoder::SetSamplesToAverage(int samplesToAverage)
{
	if (samplesToAverage < 1 || samplesToAverage > 127)
	{
		wpi_setWPIErrorWithContext(ParameterOutOfRange, "Average counter values must be between 1 and 127");
	}
	int32_t status = 0;
	switch (m_encodingType) {
		case k4X:
			setEncoderSamplesToAverage(m_encoder, samplesToAverage, &status);
			wpi_setErrorWithContext(status, getHALErrorMessage(status));
			break;
		case k1X:
		case k2X:
			m_counter->SetSamplesToAverage(samplesToAverage);
			break;
	}
}

/**
 * Get the Samples to Average which specifies the number of samples of the timer to
 * average when calculating the period. Perform averaging to account for
 * mechanical imperfections or as oversampling to increase resolution.
 * @return SamplesToAverage The number of samples being averaged (from 1 to 127)
 */
int Encoder::GetSamplesToAverage()
{
	int result = 1;
	int32_t status = 0;
	switch (m_encodingType) {
		case k4X:
			result = getEncoderSamplesToAverage(m_encoder, &status);
			wpi_setErrorWithContext(status, getHALErrorMessage(status));
			break;
		case k1X:
		case k2X:
			result = m_counter->GetSamplesToAverage();
			break;
	}
	return result;
}



/**
 * Set which parameter of the encoder you are using as a process control variable.
 *
 * @param pidSource An enum to select the parameter.
 */
void Encoder::SetPIDSourceParameter(PIDSourceParameter pidSource)
{
	if (StatusIsFatal()) return;
	m_pidSource = pidSource;
}

/**
 * Implement the PIDSource interface.
 *
 * @return The current value of the selected source parameter.
 */
double Encoder::PIDGet()
{
	if (StatusIsFatal()) return 0.0;
	switch (m_pidSource)
	{
	case kDistance:
		return GetDistance();
	case kRate:
		return GetRate();
	default:
		return 0.0;
	}
}

/**
 * Set the index source for the encoder.  When this source is activated, the encoder count automatically resets.
 *
 * @param channel A DIO channel to set as the encoder index
 * @param type The state that will cause the encoder to reset
 */
void Encoder::SetIndexSource(uint32_t channel, Encoder::IndexingType type) {
	int32_t status = 0;
	bool activeHigh = (type == kResetWhileHigh) || (type == kResetOnRisingEdge);
	bool edgeSensitive = (type == kResetOnFallingEdge) || (type == kResetOnRisingEdge);

  setEncoderIndexSource(m_encoder, channel, false, activeHigh, edgeSensitive, &status);
  wpi_setGlobalErrorWithContext(status, getHALErrorMessage(status));
}

/**
 * Set the index source for the encoder.  When this source is activated, the encoder count automatically resets.
 *
 * @param channel A digital source to set as the encoder index
 * @param type The state that will cause the encoder to reset
 */
void Encoder::SetIndexSource(DigitalSource *source, Encoder::IndexingType type) {
	int32_t status = 0;
	bool activeHigh = (type == kResetWhileHigh) || (type == kResetOnRisingEdge);
	bool edgeSensitive = (type == kResetOnFallingEdge) || (type == kResetOnRisingEdge);

  setEncoderIndexSource(m_encoder, source->GetChannelForRouting(), source->GetAnalogTriggerForRouting(), activeHigh,
  		edgeSensitive, &status);
  wpi_setGlobalErrorWithContext(status, getHALErrorMessage(status));
}

/**
 * Set the index source for the encoder.  When this source is activated, the encoder count automatically resets.
 *
 * @param channel A digital source to set as the encoder index
 * @param type The state that will cause the encoder to reset
 */
void Encoder::SetIndexSource(DigitalSource &source, Encoder::IndexingType type) {
	SetIndexSource(&source, type);
}

void Encoder::UpdateTable() {
	if (m_table != NULL) {
        m_table->PutNumber("Speed", GetRate());
        m_table->PutNumber("Distance", GetDistance());
        m_table->PutNumber("Distance per Tick", m_distancePerPulse);
	}
}

void Encoder::StartLiveWindowMode() {

}

void Encoder::StopLiveWindowMode() {

}

std::string Encoder::GetSmartDashboardType() {
	if (m_encodingType == k4X)
		return "Quadrature Encoder";
	else
		return "Encoder";
}

void Encoder::InitTable(ITable *subTable) {
	m_table = subTable;
	UpdateTable();
}

ITable * Encoder::GetTable() {
	return m_table;
}