allwpilib/wpilibc/wpilibC++/src/Commands/PIDSubsystem.cpp

/*----------------------------------------------------------------------------*/
/* Copyright (c) FIRST 2011. All Rights Reserved.
 */
/* Open Source Software - may be modified and shared by FRC teams. The code   */
/* must be accompanied by the FIRST BSD license file in $(WIND_BASE)/WPILib.  */
/*----------------------------------------------------------------------------*/

#include "Commands/PIDSubsystem.h"
#include "PIDController.h"
#include "float.h"

/**
 * Instantiates a {@link PIDSubsystem} that will use the given p, i and d
 * values.
 * @param name the name
 * @param p the proportional value
 * @param i the integral value
 * @param d the derivative value
 */
PIDSubsystem::PIDSubsystem(const char *name, double p, double i, double d)
    : Subsystem(name) {
  m_controller = new PIDController(p, i, d, this, this);
}

/**
 * Instantiates a {@link PIDSubsystem} that will use the given p, i and d
 * values.
 * @param name the name
 * @param p the proportional value
 * @param i the integral value
 * @param d the derivative value
 * @param f the feedforward value
 */
PIDSubsystem::PIDSubsystem(const char *name, double p, double i, double d,
                           double f)
    : Subsystem(name) {
  m_controller = new PIDController(p, i, d, f, this, this);
}

/**
 * Instantiates a {@link PIDSubsystem} that will use the given p, i and d
 * values.  It will also space the time
 * between PID loop calculations to be equal to the given period.
 * @param name the name
 * @param p the proportional value
 * @param i the integral value
 * @param d the derivative value
 * @param f the feedfoward value
 * @param period the time (in seconds) between calculations
 */
PIDSubsystem::PIDSubsystem(const char *name, double p, double i, double d,
                           double f, double period)
    : Subsystem(name) {
  m_controller = new PIDController(p, i, d, f, this, this, period);
}

/**
 * Instantiates a {@link PIDSubsystem} that will use the given p, i and d
 * values.
 * It will use the class name as its name.
 * @param p the proportional value
 * @param i the integral value
 * @param d the derivative value
 */
PIDSubsystem::PIDSubsystem(double p, double i, double d)
    : Subsystem("PIDSubsystem") {
  m_controller = new PIDController(p, i, d, this, this);
}

/**
 * Instantiates a {@link PIDSubsystem} that will use the given p, i and d
 * values.
 * It will use the class name as its name.
 * @param p the proportional value
 * @param i the integral value
 * @param d the derivative value
 * @param f the feedforward value
 */
PIDSubsystem::PIDSubsystem(double p, double i, double d, double f)
    : Subsystem("PIDSubsystem") {
  m_controller = new PIDController(p, i, d, f, this, this);
}

/**
 * Instantiates a {@link PIDSubsystem} that will use the given p, i and d
 * values.
 * It will use the class name as its name.
 * It will also space the time
 * between PID loop calculations to be equal to the given period.
 * @param p the proportional value
 * @param i the integral value
 * @param d the derivative value
 * @param f the feedforward value
 * @param period the time (in seconds) between calculations
 */
PIDSubsystem::PIDSubsystem(double p, double i, double d, double f,
                           double period)
    : Subsystem("PIDSubsystem") {
  m_controller = new PIDController(p, i, d, f, this, this, period);
}

PIDSubsystem::~PIDSubsystem() { delete m_controller; }

/**
 * Enables the internal {@link PIDController}
 */
void PIDSubsystem::Enable() { m_controller->Enable(); }

/**
  * Disables the internal {@link PIDController}
  */
void PIDSubsystem::Disable() { m_controller->Disable(); }

/**
 * Returns the {@link PIDController} used by this {@link PIDSubsystem}.
 * Use this if you would like to fine tune the pid loop.
 *
 * @return the {@link PIDController} used by this {@link PIDSubsystem}
 */
PIDController *PIDSubsystem::GetPIDController() { return m_controller; }

/**
 * Sets the setpoint to the given value.  If {@link PIDCommand#SetRange(double,
 * double) SetRange(...)}
 * was called,
 * then the given setpoint
 * will be trimmed to fit within the range.
 * @param setpoint the new setpoint
 */
void PIDSubsystem::SetSetpoint(double setpoint) {
  m_controller->SetSetpoint(setpoint);
}

/**
 * Adds the given value to the setpoint.
 * If {@link PIDCommand#SetRange(double, double) SetRange(...)} was used,
 * then the bounds will still be honored by this method.
 * @param deltaSetpoint the change in the setpoint
 */
void PIDSubsystem::SetSetpointRelative(double deltaSetpoint) {
  SetSetpoint(GetSetpoint() + deltaSetpoint);
}

/**
 * Return the current setpoint
 * @return The current setpoint
 */
double PIDSubsystem::GetSetpoint() { return m_controller->GetSetpoint(); }

/**
 * Sets the maximum and minimum values expected from the input.
 *
 * @param minimumInput the minimum value expected from the input
 * @param maximumInput the maximum value expected from the output
 */
void PIDSubsystem::SetInputRange(float minimumInput, float maximumInput) {
  m_controller->SetInputRange(minimumInput, maximumInput);
}

/**
 * Sets the maximum and minimum values to write.
 *
 * @param minimumOutput the minimum value to write to the output
 * @param maximumOutput the maximum value to write to the output
 */
void PIDSubsystem::SetOutputRange(float minimumOutput, float maximumOutput) {
  m_controller->SetOutputRange(minimumOutput, maximumOutput);
}

/*
 * Set the absolute error which is considered tolerable for use with
 * OnTarget.
 * @param percentage error which is tolerable
 */
void PIDSubsystem::SetAbsoluteTolerance(float absValue) {
  m_controller->SetAbsoluteTolerance(absValue);
}

/*
 * Set the percentage error which is considered tolerable for use with
 * OnTarget.
 * @param percentage error which is tolerable
 */
void PIDSubsystem::SetPercentTolerance(float percent) {
  m_controller->SetPercentTolerance(percent);
}

/*
 * Return true if the error is within the percentage of the total input range,
 * determined by SetTolerance. This asssumes that the maximum and minimum input
 * were set using SetInput. Use OnTarget() in the IsFinished() method of
 * commands
 * that use this subsystem.
 *
 * Currently this just reports on target as the actual value passes through the
 * setpoint.
 * Ideally it should be based on being within the tolerance for some period of
 * time.
 *
 * @return true if the error is within the percentage tolerance of the input
 * range
 */
bool PIDSubsystem::OnTarget() const { return m_controller->OnTarget(); }

/**
 * Returns the current position
 * @return the current position
 */
double PIDSubsystem::GetPosition() { return ReturnPIDInput(); }

void PIDSubsystem::PIDWrite(float output) { UsePIDOutput(output); }

double PIDSubsystem::PIDGet() const { return ReturnPIDInput(); }

std::string PIDSubsystem::GetSmartDashboardType() const { return "PIDCommand"; }
void PIDSubsystem::InitTable(ITable *table) {
  m_controller->InitTable(table);
  Subsystem::InitTable(table);
}