Team2890/allwpilib
4
0
Fork 0
mirror of https://github.com/wpilibsuite/allwpilib synced 2026-06-20 00:51:42 +00:00
Code Issues Packages Projects Releases Wiki Activity

[sysid] Remove unused "gains to encoder counts" checkbox (#6234)

Browse Source
This commit is contained in:
Tyler Veness
2024-01-15 22:40:45 -08:00
committed by GitHub
parent 6da21c4943
commit 97828bd325
6 changed files with 13 additions and 95 deletions
Download Patch File Download Diff File Expand all files Collapse all files

54
sysid/src/main/native/cpp/view/Analyzer.cpp
View File

@@ -562,7 +562,6 @@ void Analyzer::DisplayFeedbackGains() {
m_settings.type = FeedbackControllerLoopType::kVelocity;
m_selectedLoopType =
static_cast<int>(FeedbackControllerLoopType::kVelocity);
m_settings.convertGainsToEncTicks = m_selectedPreset > 2;
UpdateFeedbackGains();
}
ImGui::SameLine();
@@ -646,59 +645,6 @@ void Analyzer::DisplayFeedbackGains() {
"accurate if the characteristic timescale of the mechanism "
"is small.");
// Add CPR and Gearing for converting Feedback Gains
ImGui::Separator();
ImGui::Spacing();
if (ImGui::Checkbox("Convert Gains to Encoder Counts",
&m_settings.convertGainsToEncTicks)) {
UpdateFeedbackGains();
}
sysid::CreateTooltip(
"Whether the feedback gains should be in terms of encoder counts or "
"output units. Because smart motor controllers usually don't have "
"direct access to the output units (i.e. m/s for a drivetrain), they "
"perform feedback on the encoder counts directly. If you are using a "
"PID Controller on the RoboRIO, you are probably performing feedback "
"on the output units directly.\n\nNote that if you have properly set "
"up position and velocity conversion factors with the SPARK MAX, you "
"can leave this box unchecked. The motor controller will perform "
"feedback on the output directly.");
if (m_settings.convertGainsToEncTicks) {
ImGui::SetNextItemWidth(ImGui::GetFontSize() * 5);
if (ImGui::InputDouble("##Numerator", &m_gearingNumerator, 0.0, 0.0, "%.4f",
ImGuiInputTextFlags_EnterReturnsTrue) &&
m_gearingNumerator > 0) {
m_settings.gearing = m_gearingNumerator / m_gearingDenominator;
UpdateFeedbackGains();
}
ImGui::SameLine();
ImGui::SetNextItemWidth(ImGui::GetFontSize() * 5);
if (ImGui::InputDouble("##Denominator", &m_gearingDenominator, 0.0, 0.0,
"%.4f", ImGuiInputTextFlags_EnterReturnsTrue) &&
m_gearingDenominator > 0) {
m_settings.gearing = m_gearingNumerator / m_gearingDenominator;
UpdateFeedbackGains();
}
sysid::CreateTooltip(
"The gearing between the encoder and the motor shaft (# of encoder "
"turns / # of motor shaft turns).");
ImGui::SetNextItemWidth(ImGui::GetFontSize() * 5);
if (ImGui::InputInt("CPR", &m_settings.cpr, 0, 0,
ImGuiInputTextFlags_EnterReturnsTrue) &&
m_settings.cpr > 0) {
UpdateFeedbackGains();
}
sysid::CreateTooltip(
"The counts per rotation of your encoder. This is the number of counts "
"reported in user code when the encoder is rotated exactly once. Some "
"common values for various motors/encoders are:\n\n"
"Falcon 500: 2048\nNEO: 1\nCTRE Mag Encoder / CANCoder: 4096\nREV "
"Through Bore Encoder: 8192\n");
}
ImGui::Separator();
ImGui::Spacing();