[wpilib] Pregenerate PWM motor controllers (#6742)

Co-authored-by: Gold856 <117957790+Gold856@users.noreply.github.com>

wpilibc/src/generated/main/native/cpp/motorcontrol/DMC60.cpp

@@ -0,0 +1,20 @@
+// Copyright (c) FIRST and other WPILib contributors.
+// Open Source Software; you can modify and/or share it under the terms of
+// the WPILib BSD license file in the root directory of this project.
+
+// THIS FILE WAS AUTO-GENERATED BY ./wpilibc/generate_pwm_motor_controllers.py. DO NOT MODIFY
+
+#include "frc/motorcontrol/DMC60.h"
+
+#include <hal/FRCUsageReporting.h>
+
+using namespace frc;
+
+DMC60::DMC60(int channel) : PWMMotorController("DMC60", channel) {
+  m_pwm.SetBounds(2.004_ms, 1.52_ms, 1.5_ms, 1.48_ms, 0.997_ms);
+  m_pwm.SetPeriodMultiplier(PWM::kPeriodMultiplier_1X);
+  m_pwm.SetSpeed(0.0);
+  m_pwm.SetZeroLatch();
+
+  HAL_Report(HALUsageReporting::kResourceType_DigilentDMC60, GetChannel() + 1);
+}

wpilibc/src/generated/main/native/cpp/motorcontrol/Jaguar.cpp

@@ -0,0 +1,20 @@
+// Copyright (c) FIRST and other WPILib contributors.
+// Open Source Software; you can modify and/or share it under the terms of
+// the WPILib BSD license file in the root directory of this project.
+
+// THIS FILE WAS AUTO-GENERATED BY ./wpilibc/generate_pwm_motor_controllers.py. DO NOT MODIFY
+
+#include "frc/motorcontrol/Jaguar.h"
+
+#include <hal/FRCUsageReporting.h>
+
+using namespace frc;
+
+Jaguar::Jaguar(int channel) : PWMMotorController("Jaguar", channel) {
+  m_pwm.SetBounds(2.31_ms, 1.55_ms, 1.507_ms, 1.454_ms, 0.697_ms);
+  m_pwm.SetPeriodMultiplier(PWM::kPeriodMultiplier_1X);
+  m_pwm.SetSpeed(0.0);
+  m_pwm.SetZeroLatch();
+
+  HAL_Report(HALUsageReporting::kResourceType_Jaguar, GetChannel() + 1);
+}

wpilibc/src/generated/main/native/cpp/motorcontrol/PWMSparkFlex.cpp

@@ -0,0 +1,20 @@
+// Copyright (c) FIRST and other WPILib contributors.
+// Open Source Software; you can modify and/or share it under the terms of
+// the WPILib BSD license file in the root directory of this project.
+
+// THIS FILE WAS AUTO-GENERATED BY ./wpilibc/generate_pwm_motor_controllers.py. DO NOT MODIFY
+
+#include "frc/motorcontrol/PWMSparkFlex.h"
+
+#include <hal/FRCUsageReporting.h>
+
+using namespace frc;
+
+PWMSparkFlex::PWMSparkFlex(int channel) : PWMMotorController("PWMSparkFlex", channel) {
+  m_pwm.SetBounds(2.003_ms, 1.55_ms, 1.5_ms, 1.46_ms, 0.999_ms);
+  m_pwm.SetPeriodMultiplier(PWM::kPeriodMultiplier_1X);
+  m_pwm.SetSpeed(0.0);
+  m_pwm.SetZeroLatch();
+
+  HAL_Report(HALUsageReporting::kResourceType_RevSparkFlexPWM, GetChannel() + 1);
+}

wpilibc/src/generated/main/native/cpp/motorcontrol/PWMSparkMax.cpp

@@ -0,0 +1,20 @@
+// Copyright (c) FIRST and other WPILib contributors.
+// Open Source Software; you can modify and/or share it under the terms of
+// the WPILib BSD license file in the root directory of this project.
+
+// THIS FILE WAS AUTO-GENERATED BY ./wpilibc/generate_pwm_motor_controllers.py. DO NOT MODIFY
+
+#include "frc/motorcontrol/PWMSparkMax.h"
+
+#include <hal/FRCUsageReporting.h>
+
+using namespace frc;
+
+PWMSparkMax::PWMSparkMax(int channel) : PWMMotorController("PWMSparkMax", channel) {
+  m_pwm.SetBounds(2.003_ms, 1.55_ms, 1.5_ms, 1.46_ms, 0.999_ms);
+  m_pwm.SetPeriodMultiplier(PWM::kPeriodMultiplier_1X);
+  m_pwm.SetSpeed(0.0);
+  m_pwm.SetZeroLatch();
+
+  HAL_Report(HALUsageReporting::kResourceType_RevSparkMaxPWM, GetChannel() + 1);
+}

wpilibc/src/generated/main/native/cpp/motorcontrol/PWMTalonFX.cpp

@@ -0,0 +1,20 @@
+// Copyright (c) FIRST and other WPILib contributors.
+// Open Source Software; you can modify and/or share it under the terms of
+// the WPILib BSD license file in the root directory of this project.
+
+// THIS FILE WAS AUTO-GENERATED BY ./wpilibc/generate_pwm_motor_controllers.py. DO NOT MODIFY
+
+#include "frc/motorcontrol/PWMTalonFX.h"
+
+#include <hal/FRCUsageReporting.h>
+
+using namespace frc;
+
+PWMTalonFX::PWMTalonFX(int channel) : PWMMotorController("PWMTalonFX", channel) {
+  m_pwm.SetBounds(2.004_ms, 1.52_ms, 1.5_ms, 1.48_ms, 0.997_ms);
+  m_pwm.SetPeriodMultiplier(PWM::kPeriodMultiplier_1X);
+  m_pwm.SetSpeed(0.0);
+  m_pwm.SetZeroLatch();
+
+  HAL_Report(HALUsageReporting::kResourceType_TalonFX, GetChannel() + 1);
+}

wpilibc/src/generated/main/native/cpp/motorcontrol/PWMTalonSRX.cpp

@@ -0,0 +1,20 @@
+// Copyright (c) FIRST and other WPILib contributors.
+// Open Source Software; you can modify and/or share it under the terms of
+// the WPILib BSD license file in the root directory of this project.
+
+// THIS FILE WAS AUTO-GENERATED BY ./wpilibc/generate_pwm_motor_controllers.py. DO NOT MODIFY
+
+#include "frc/motorcontrol/PWMTalonSRX.h"
+
+#include <hal/FRCUsageReporting.h>
+
+using namespace frc;
+
+PWMTalonSRX::PWMTalonSRX(int channel) : PWMMotorController("PWMTalonSRX", channel) {
+  m_pwm.SetBounds(2.004_ms, 1.52_ms, 1.5_ms, 1.48_ms, 0.997_ms);
+  m_pwm.SetPeriodMultiplier(PWM::kPeriodMultiplier_1X);
+  m_pwm.SetSpeed(0.0);
+  m_pwm.SetZeroLatch();
+
+  HAL_Report(HALUsageReporting::kResourceType_PWMTalonSRX, GetChannel() + 1);
+}

wpilibc/src/generated/main/native/cpp/motorcontrol/PWMVenom.cpp

@@ -0,0 +1,20 @@
+// Copyright (c) FIRST and other WPILib contributors.
+// Open Source Software; you can modify and/or share it under the terms of
+// the WPILib BSD license file in the root directory of this project.
+
+// THIS FILE WAS AUTO-GENERATED BY ./wpilibc/generate_pwm_motor_controllers.py. DO NOT MODIFY
+
+#include "frc/motorcontrol/PWMVenom.h"
+
+#include <hal/FRCUsageReporting.h>
+
+using namespace frc;
+
+PWMVenom::PWMVenom(int channel) : PWMMotorController("PWMVenom", channel) {
+  m_pwm.SetBounds(2.004_ms, 1.52_ms, 1.5_ms, 1.48_ms, 0.997_ms);
+  m_pwm.SetPeriodMultiplier(PWM::kPeriodMultiplier_1X);
+  m_pwm.SetSpeed(0.0);
+  m_pwm.SetZeroLatch();
+
+  HAL_Report(HALUsageReporting::kResourceType_FusionVenom, GetChannel() + 1);
+}

wpilibc/src/generated/main/native/cpp/motorcontrol/PWMVictorSPX.cpp

@@ -0,0 +1,20 @@
+// Copyright (c) FIRST and other WPILib contributors.
+// Open Source Software; you can modify and/or share it under the terms of
+// the WPILib BSD license file in the root directory of this project.
+
+// THIS FILE WAS AUTO-GENERATED BY ./wpilibc/generate_pwm_motor_controllers.py. DO NOT MODIFY
+
+#include "frc/motorcontrol/PWMVictorSPX.h"
+
+#include <hal/FRCUsageReporting.h>
+
+using namespace frc;
+
+PWMVictorSPX::PWMVictorSPX(int channel) : PWMMotorController("PWMVictorSPX", channel) {
+  m_pwm.SetBounds(2.004_ms, 1.52_ms, 1.5_ms, 1.48_ms, 0.997_ms);
+  m_pwm.SetPeriodMultiplier(PWM::kPeriodMultiplier_1X);
+  m_pwm.SetSpeed(0.0);
+  m_pwm.SetZeroLatch();
+
+  HAL_Report(HALUsageReporting::kResourceType_PWMVictorSPX, GetChannel() + 1);
+}

wpilibc/src/generated/main/native/cpp/motorcontrol/SD540.cpp

@@ -0,0 +1,20 @@
+// Copyright (c) FIRST and other WPILib contributors.
+// Open Source Software; you can modify and/or share it under the terms of
+// the WPILib BSD license file in the root directory of this project.
+
+// THIS FILE WAS AUTO-GENERATED BY ./wpilibc/generate_pwm_motor_controllers.py. DO NOT MODIFY
+
+#include "frc/motorcontrol/SD540.h"
+
+#include <hal/FRCUsageReporting.h>
+
+using namespace frc;
+
+SD540::SD540(int channel) : PWMMotorController("SD540", channel) {
+  m_pwm.SetBounds(2.05_ms, 1.55_ms, 1.5_ms, 1.44_ms, 0.94_ms);
+  m_pwm.SetPeriodMultiplier(PWM::kPeriodMultiplier_1X);
+  m_pwm.SetSpeed(0.0);
+  m_pwm.SetZeroLatch();
+
+  HAL_Report(HALUsageReporting::kResourceType_MindsensorsSD540, GetChannel() + 1);
+}

wpilibc/src/generated/main/native/cpp/motorcontrol/Spark.cpp

@@ -0,0 +1,20 @@
+// Copyright (c) FIRST and other WPILib contributors.
+// Open Source Software; you can modify and/or share it under the terms of
+// the WPILib BSD license file in the root directory of this project.
+
+// THIS FILE WAS AUTO-GENERATED BY ./wpilibc/generate_pwm_motor_controllers.py. DO NOT MODIFY
+
+#include "frc/motorcontrol/Spark.h"
+
+#include <hal/FRCUsageReporting.h>
+
+using namespace frc;
+
+Spark::Spark(int channel) : PWMMotorController("Spark", channel) {
+  m_pwm.SetBounds(2.003_ms, 1.55_ms, 1.5_ms, 1.46_ms, 0.999_ms);
+  m_pwm.SetPeriodMultiplier(PWM::kPeriodMultiplier_1X);
+  m_pwm.SetSpeed(0.0);
+  m_pwm.SetZeroLatch();
+
+  HAL_Report(HALUsageReporting::kResourceType_RevSPARK, GetChannel() + 1);
+}

wpilibc/src/generated/main/native/cpp/motorcontrol/Talon.cpp

@@ -0,0 +1,20 @@
+// Copyright (c) FIRST and other WPILib contributors.
+// Open Source Software; you can modify and/or share it under the terms of
+// the WPILib BSD license file in the root directory of this project.
+
+// THIS FILE WAS AUTO-GENERATED BY ./wpilibc/generate_pwm_motor_controllers.py. DO NOT MODIFY
+
+#include "frc/motorcontrol/Talon.h"
+
+#include <hal/FRCUsageReporting.h>
+
+using namespace frc;
+
+Talon::Talon(int channel) : PWMMotorController("Talon", channel) {
+  m_pwm.SetBounds(2.037_ms, 1.539_ms, 1.513_ms, 1.487_ms, 0.989_ms);
+  m_pwm.SetPeriodMultiplier(PWM::kPeriodMultiplier_1X);
+  m_pwm.SetSpeed(0.0);
+  m_pwm.SetZeroLatch();
+
+  HAL_Report(HALUsageReporting::kResourceType_Talon, GetChannel() + 1);
+}

wpilibc/src/generated/main/native/cpp/motorcontrol/Victor.cpp

@@ -0,0 +1,20 @@
+// Copyright (c) FIRST and other WPILib contributors.
+// Open Source Software; you can modify and/or share it under the terms of
+// the WPILib BSD license file in the root directory of this project.
+
+// THIS FILE WAS AUTO-GENERATED BY ./wpilibc/generate_pwm_motor_controllers.py. DO NOT MODIFY
+
+#include "frc/motorcontrol/Victor.h"
+
+#include <hal/FRCUsageReporting.h>
+
+using namespace frc;
+
+Victor::Victor(int channel) : PWMMotorController("Victor", channel) {
+  m_pwm.SetBounds(2.027_ms, 1.525_ms, 1.507_ms, 1.49_ms, 1.026_ms);
+  m_pwm.SetPeriodMultiplier(PWM::kPeriodMultiplier_2X);
+  m_pwm.SetSpeed(0.0);
+  m_pwm.SetZeroLatch();
+
+  HAL_Report(HALUsageReporting::kResourceType_Victor, GetChannel() + 1);
+}

wpilibc/src/generated/main/native/cpp/motorcontrol/VictorSP.cpp

@@ -0,0 +1,20 @@
+// Copyright (c) FIRST and other WPILib contributors.
+// Open Source Software; you can modify and/or share it under the terms of
+// the WPILib BSD license file in the root directory of this project.
+
+// THIS FILE WAS AUTO-GENERATED BY ./wpilibc/generate_pwm_motor_controllers.py. DO NOT MODIFY
+
+#include "frc/motorcontrol/VictorSP.h"
+
+#include <hal/FRCUsageReporting.h>
+
+using namespace frc;
+
+VictorSP::VictorSP(int channel) : PWMMotorController("VictorSP", channel) {
+  m_pwm.SetBounds(2.004_ms, 1.52_ms, 1.5_ms, 1.48_ms, 0.997_ms);
+  m_pwm.SetPeriodMultiplier(PWM::kPeriodMultiplier_1X);
+  m_pwm.SetSpeed(0.0);
+  m_pwm.SetZeroLatch();
+
+  HAL_Report(HALUsageReporting::kResourceType_VictorSP, GetChannel() + 1);
+}

wpilibc/src/generated/main/native/include/frc/motorcontrol/DMC60.h

@@ -0,0 +1,43 @@
+// Copyright (c) FIRST and other WPILib contributors.
+// Open Source Software; you can modify and/or share it under the terms of
+// the WPILib BSD license file in the root directory of this project.
+
+// THIS FILE WAS AUTO-GENERATED BY ./wpilibc/generate_pwm_motor_controllers.py. DO NOT MODIFY
+
+#pragma once
+
+#include "frc/motorcontrol/PWMMotorController.h"
+
+namespace frc {
+
+/**
+ * Digilent DMC 60 Motor Controller with PWM control.
+ *
+ * Note that the DMC 60 uses the following bounds for PWM values. These
+ * values should work reasonably well for most controllers, but if users
+ * experience issues such as asymmetric behavior around the deadband or
+ * inability to saturate the controller in either direction, calibration is
+ * recommended. The calibration procedure can be found in the DMC 60 User
+ * Manual available from Digilent.
+ *
+ * \li 2.004ms = full "forward"
+ * \li 1.520ms = the "high end" of the deadband range
+ * \li 1.500ms = center of the deadband range (off)
+ * \li 1.480ms = the "low end" of the deadband range
+ * \li 0.997ms = full "reverse"
+ */
+class DMC60 : public PWMMotorController {
+ public:
+  /**
+   * Constructor for a DMC 60 connected via PWM.
+   *
+   * @param channel The PWM channel that the DMC 60 is attached to. 0-9 are
+   *                on-board, 10-19 are on the MXP port
+   */
+  explicit DMC60(int channel);
+
+  DMC60(DMC60&&) = default;
+  DMC60& operator=(DMC60&&) = default;
+};
+
+}  // namespace frc

wpilibc/src/generated/main/native/include/frc/motorcontrol/Jaguar.h

@@ -0,0 +1,43 @@
+// Copyright (c) FIRST and other WPILib contributors.
+// Open Source Software; you can modify and/or share it under the terms of
+// the WPILib BSD license file in the root directory of this project.
+
+// THIS FILE WAS AUTO-GENERATED BY ./wpilibc/generate_pwm_motor_controllers.py. DO NOT MODIFY
+
+#pragma once
+
+#include "frc/motorcontrol/PWMMotorController.h"
+
+namespace frc {
+
+/**
+ * Luminary Micro / Vex Robotics Jaguar Motor Controller with PWM control.
+ *
+ * Note that the Jaguar uses the following bounds for PWM values. These
+ * values should work reasonably well for most controllers, but if users
+ * experience issues such as asymmetric behavior around the deadband or
+ * inability to saturate the controller in either direction, calibration is
+ * recommended. The calibration procedure can be found in the Jaguar User
+ * Manual available from Luminary Micro / Vex Robotics.
+ *
+ * \li 2.310ms = full "forward"
+ * \li 1.550ms = the "high end" of the deadband range
+ * \li 1.507ms = center of the deadband range (off)
+ * \li 1.454ms = the "low end" of the deadband range
+ * \li 0.697ms = full "reverse"
+ */
+class Jaguar : public PWMMotorController {
+ public:
+  /**
+   * Constructor for a Jaguar connected via PWM.
+   *
+   * @param channel The PWM channel that the Jaguar is attached to. 0-9 are
+   *                on-board, 10-19 are on the MXP port
+   */
+  explicit Jaguar(int channel);
+
+  Jaguar(Jaguar&&) = default;
+  Jaguar& operator=(Jaguar&&) = default;
+};
+
+}  // namespace frc

wpilibc/src/generated/main/native/include/frc/motorcontrol/PWMSparkFlex.h

@@ -0,0 +1,43 @@
+// Copyright (c) FIRST and other WPILib contributors.
+// Open Source Software; you can modify and/or share it under the terms of
+// the WPILib BSD license file in the root directory of this project.
+
+// THIS FILE WAS AUTO-GENERATED BY ./wpilibc/generate_pwm_motor_controllers.py. DO NOT MODIFY
+
+#pragma once
+
+#include "frc/motorcontrol/PWMMotorController.h"
+
+namespace frc {
+
+/**
+ * REV Robotics SPARK Flex Motor Controller with PWM control.
+ *
+ * Note that the SPARK Flex uses the following bounds for PWM values. These
+ * values should work reasonably well for most controllers, but if users
+ * experience issues such as asymmetric behavior around the deadband or
+ * inability to saturate the controller in either direction, calibration is
+ * recommended. The calibration procedure can be found in the SPARK Flex User
+ * Manual available from REV Robotics.
+ *
+ * \li 2.003ms = full "forward"
+ * \li 1.550ms = the "high end" of the deadband range
+ * \li 1.500ms = center of the deadband range (off)
+ * \li 1.460ms = the "low end" of the deadband range
+ * \li 0.999ms = full "reverse"
+ */
+class PWMSparkFlex : public PWMMotorController {
+ public:
+  /**
+   * Constructor for a SPARK Flex connected via PWM.
+   *
+   * @param channel The PWM channel that the SPARK Flex is attached to. 0-9 are
+   *                on-board, 10-19 are on the MXP port
+   */
+  explicit PWMSparkFlex(int channel);
+
+  PWMSparkFlex(PWMSparkFlex&&) = default;
+  PWMSparkFlex& operator=(PWMSparkFlex&&) = default;
+};
+
+}  // namespace frc

wpilibc/src/generated/main/native/include/frc/motorcontrol/PWMSparkMax.h

@@ -0,0 +1,43 @@
+// Copyright (c) FIRST and other WPILib contributors.
+// Open Source Software; you can modify and/or share it under the terms of
+// the WPILib BSD license file in the root directory of this project.
+
+// THIS FILE WAS AUTO-GENERATED BY ./wpilibc/generate_pwm_motor_controllers.py. DO NOT MODIFY
+
+#pragma once
+
+#include "frc/motorcontrol/PWMMotorController.h"
+
+namespace frc {
+
+/**
+ * REV Robotics SPARK MAX Motor Controller with PWM control.
+ *
+ * Note that the SPARK MAX uses the following bounds for PWM values. These
+ * values should work reasonably well for most controllers, but if users
+ * experience issues such as asymmetric behavior around the deadband or
+ * inability to saturate the controller in either direction, calibration is
+ * recommended. The calibration procedure can be found in the SPARK MAX User
+ * Manual available from REV Robotics.
+ *
+ * \li 2.003ms = full "forward"
+ * \li 1.550ms = the "high end" of the deadband range
+ * \li 1.500ms = center of the deadband range (off)
+ * \li 1.460ms = the "low end" of the deadband range
+ * \li 0.999ms = full "reverse"
+ */
+class PWMSparkMax : public PWMMotorController {
+ public:
+  /**
+   * Constructor for a SPARK MAX connected via PWM.
+   *
+   * @param channel The PWM channel that the SPARK MAX is attached to. 0-9 are
+   *                on-board, 10-19 are on the MXP port
+   */
+  explicit PWMSparkMax(int channel);
+
+  PWMSparkMax(PWMSparkMax&&) = default;
+  PWMSparkMax& operator=(PWMSparkMax&&) = default;
+};
+
+}  // namespace frc

wpilibc/src/generated/main/native/include/frc/motorcontrol/PWMTalonFX.h

@@ -0,0 +1,43 @@
+// Copyright (c) FIRST and other WPILib contributors.
+// Open Source Software; you can modify and/or share it under the terms of
+// the WPILib BSD license file in the root directory of this project.
+
+// THIS FILE WAS AUTO-GENERATED BY ./wpilibc/generate_pwm_motor_controllers.py. DO NOT MODIFY
+
+#pragma once
+
+#include "frc/motorcontrol/PWMMotorController.h"
+
+namespace frc {
+
+/**
+ * Cross the Road Electronics (CTRE) Talon FX Motor Controller with PWM control.
+ *
+ * Note that the Talon FX uses the following bounds for PWM values. These
+ * values should work reasonably well for most controllers, but if users
+ * experience issues such as asymmetric behavior around the deadband or
+ * inability to saturate the controller in either direction, calibration is
+ * recommended. The calibration procedure can be found in the Talon FX User
+ * Manual available from Cross the Road Electronics (CTRE).
+ *
+ * \li 2.004ms = full "forward"
+ * \li 1.520ms = the "high end" of the deadband range
+ * \li 1.500ms = center of the deadband range (off)
+ * \li 1.480ms = the "low end" of the deadband range
+ * \li 0.997ms = full "reverse"
+ */
+class PWMTalonFX : public PWMMotorController {
+ public:
+  /**
+   * Constructor for a Talon FX connected via PWM.
+   *
+   * @param channel The PWM channel that the Talon FX is attached to. 0-9 are
+   *                on-board, 10-19 are on the MXP port
+   */
+  explicit PWMTalonFX(int channel);
+
+  PWMTalonFX(PWMTalonFX&&) = default;
+  PWMTalonFX& operator=(PWMTalonFX&&) = default;
+};
+
+}  // namespace frc

wpilibc/src/generated/main/native/include/frc/motorcontrol/PWMTalonSRX.h

@@ -0,0 +1,43 @@
+// Copyright (c) FIRST and other WPILib contributors.
+// Open Source Software; you can modify and/or share it under the terms of
+// the WPILib BSD license file in the root directory of this project.
+
+// THIS FILE WAS AUTO-GENERATED BY ./wpilibc/generate_pwm_motor_controllers.py. DO NOT MODIFY
+
+#pragma once
+
+#include "frc/motorcontrol/PWMMotorController.h"
+
+namespace frc {
+
+/**
+ * Cross the Road Electronics (CTRE) Talon SRX Motor Controller with PWM control.
+ *
+ * Note that the Talon SRX uses the following bounds for PWM values. These
+ * values should work reasonably well for most controllers, but if users
+ * experience issues such as asymmetric behavior around the deadband or
+ * inability to saturate the controller in either direction, calibration is
+ * recommended. The calibration procedure can be found in the Talon SRX User
+ * Manual available from Cross the Road Electronics (CTRE).
+ *
+ * \li 2.004ms = full "forward"
+ * \li 1.520ms = the "high end" of the deadband range
+ * \li 1.500ms = center of the deadband range (off)
+ * \li 1.480ms = the "low end" of the deadband range
+ * \li 0.997ms = full "reverse"
+ */
+class PWMTalonSRX : public PWMMotorController {
+ public:
+  /**
+   * Constructor for a Talon SRX connected via PWM.
+   *
+   * @param channel The PWM channel that the Talon SRX is attached to. 0-9 are
+   *                on-board, 10-19 are on the MXP port
+   */
+  explicit PWMTalonSRX(int channel);
+
+  PWMTalonSRX(PWMTalonSRX&&) = default;
+  PWMTalonSRX& operator=(PWMTalonSRX&&) = default;
+};
+
+}  // namespace frc

wpilibc/src/generated/main/native/include/frc/motorcontrol/PWMVenom.h

@@ -0,0 +1,43 @@
+// Copyright (c) FIRST and other WPILib contributors.
+// Open Source Software; you can modify and/or share it under the terms of
+// the WPILib BSD license file in the root directory of this project.
+
+// THIS FILE WAS AUTO-GENERATED BY ./wpilibc/generate_pwm_motor_controllers.py. DO NOT MODIFY
+
+#pragma once
+
+#include "frc/motorcontrol/PWMMotorController.h"
+
+namespace frc {
+
+/**
+ * Playing with Fusion Venom Motor Controller with PWM control.
+ *
+ * Note that the Venom uses the following bounds for PWM values. These
+ * values should work reasonably well for most controllers, but if users
+ * experience issues such as asymmetric behavior around the deadband or
+ * inability to saturate the controller in either direction, calibration is
+ * recommended. The calibration procedure can be found in the Venom User
+ * Manual available from Playing with Fusion.
+ *
+ * \li 2.004ms = full "forward"
+ * \li 1.520ms = the "high end" of the deadband range
+ * \li 1.500ms = center of the deadband range (off)
+ * \li 1.480ms = the "low end" of the deadband range
+ * \li 0.997ms = full "reverse"
+ */
+class PWMVenom : public PWMMotorController {
+ public:
+  /**
+   * Constructor for a Venom connected via PWM.
+   *
+   * @param channel The PWM channel that the Venom is attached to. 0-9 are
+   *                on-board, 10-19 are on the MXP port
+   */
+  explicit PWMVenom(int channel);
+
+  PWMVenom(PWMVenom&&) = default;
+  PWMVenom& operator=(PWMVenom&&) = default;
+};
+
+}  // namespace frc

wpilibc/src/generated/main/native/include/frc/motorcontrol/PWMVictorSPX.h

@@ -0,0 +1,43 @@
+// Copyright (c) FIRST and other WPILib contributors.
+// Open Source Software; you can modify and/or share it under the terms of
+// the WPILib BSD license file in the root directory of this project.
+
+// THIS FILE WAS AUTO-GENERATED BY ./wpilibc/generate_pwm_motor_controllers.py. DO NOT MODIFY
+
+#pragma once
+
+#include "frc/motorcontrol/PWMMotorController.h"
+
+namespace frc {
+
+/**
+ * Cross the Road Electronics (CTRE) Victor SPX Motor Controller with PWM control.
+ *
+ * Note that the Victor SPX uses the following bounds for PWM values. These
+ * values should work reasonably well for most controllers, but if users
+ * experience issues such as asymmetric behavior around the deadband or
+ * inability to saturate the controller in either direction, calibration is
+ * recommended. The calibration procedure can be found in the Victor SPX User
+ * Manual available from Cross the Road Electronics (CTRE).
+ *
+ * \li 2.004ms = full "forward"
+ * \li 1.520ms = the "high end" of the deadband range
+ * \li 1.500ms = center of the deadband range (off)
+ * \li 1.480ms = the "low end" of the deadband range
+ * \li 0.997ms = full "reverse"
+ */
+class PWMVictorSPX : public PWMMotorController {
+ public:
+  /**
+   * Constructor for a Victor SPX connected via PWM.
+   *
+   * @param channel The PWM channel that the Victor SPX is attached to. 0-9 are
+   *                on-board, 10-19 are on the MXP port
+   */
+  explicit PWMVictorSPX(int channel);
+
+  PWMVictorSPX(PWMVictorSPX&&) = default;
+  PWMVictorSPX& operator=(PWMVictorSPX&&) = default;
+};
+
+}  // namespace frc

wpilibc/src/generated/main/native/include/frc/motorcontrol/SD540.h

@@ -0,0 +1,43 @@
+// Copyright (c) FIRST and other WPILib contributors.
+// Open Source Software; you can modify and/or share it under the terms of
+// the WPILib BSD license file in the root directory of this project.
+
+// THIS FILE WAS AUTO-GENERATED BY ./wpilibc/generate_pwm_motor_controllers.py. DO NOT MODIFY
+
+#pragma once
+
+#include "frc/motorcontrol/PWMMotorController.h"
+
+namespace frc {
+
+/**
+ * Mindsensors SD540 Motor Controller with PWM control.
+ *
+ * Note that the SD540 uses the following bounds for PWM values. These
+ * values should work reasonably well for most controllers, but if users
+ * experience issues such as asymmetric behavior around the deadband or
+ * inability to saturate the controller in either direction, calibration is
+ * recommended. The calibration procedure can be found in the SD540 User
+ * Manual available from Mindsensors.
+ *
+ * \li 2.050ms = full "forward"
+ * \li 1.550ms = the "high end" of the deadband range
+ * \li 1.500ms = center of the deadband range (off)
+ * \li 1.440ms = the "low end" of the deadband range
+ * \li 0.940ms = full "reverse"
+ */
+class SD540 : public PWMMotorController {
+ public:
+  /**
+   * Constructor for a SD540 connected via PWM.
+   *
+   * @param channel The PWM channel that the SD540 is attached to. 0-9 are
+   *                on-board, 10-19 are on the MXP port
+   */
+  explicit SD540(int channel);
+
+  SD540(SD540&&) = default;
+  SD540& operator=(SD540&&) = default;
+};
+
+}  // namespace frc

wpilibc/src/generated/main/native/include/frc/motorcontrol/Spark.h

@@ -0,0 +1,43 @@
+// Copyright (c) FIRST and other WPILib contributors.
+// Open Source Software; you can modify and/or share it under the terms of
+// the WPILib BSD license file in the root directory of this project.
+
+// THIS FILE WAS AUTO-GENERATED BY ./wpilibc/generate_pwm_motor_controllers.py. DO NOT MODIFY
+
+#pragma once
+
+#include "frc/motorcontrol/PWMMotorController.h"
+
+namespace frc {
+
+/**
+ * REV Robotics SPARK Motor Controller with PWM control.
+ *
+ * Note that the SPARK uses the following bounds for PWM values. These
+ * values should work reasonably well for most controllers, but if users
+ * experience issues such as asymmetric behavior around the deadband or
+ * inability to saturate the controller in either direction, calibration is
+ * recommended. The calibration procedure can be found in the SPARK User
+ * Manual available from REV Robotics.
+ *
+ * \li 2.003ms = full "forward"
+ * \li 1.550ms = the "high end" of the deadband range
+ * \li 1.500ms = center of the deadband range (off)
+ * \li 1.460ms = the "low end" of the deadband range
+ * \li 0.999ms = full "reverse"
+ */
+class Spark : public PWMMotorController {
+ public:
+  /**
+   * Constructor for a SPARK connected via PWM.
+   *
+   * @param channel The PWM channel that the SPARK is attached to. 0-9 are
+   *                on-board, 10-19 are on the MXP port
+   */
+  explicit Spark(int channel);
+
+  Spark(Spark&&) = default;
+  Spark& operator=(Spark&&) = default;
+};
+
+}  // namespace frc

wpilibc/src/generated/main/native/include/frc/motorcontrol/Talon.h

@@ -0,0 +1,43 @@
+// Copyright (c) FIRST and other WPILib contributors.
+// Open Source Software; you can modify and/or share it under the terms of
+// the WPILib BSD license file in the root directory of this project.
+
+// THIS FILE WAS AUTO-GENERATED BY ./wpilibc/generate_pwm_motor_controllers.py. DO NOT MODIFY
+
+#pragma once
+
+#include "frc/motorcontrol/PWMMotorController.h"
+
+namespace frc {
+
+/**
+ * Cross the Road Electronics (CTRE) Talon Motor Controller with PWM control.
+ *
+ * Note that the Talon uses the following bounds for PWM values. These
+ * values should work reasonably well for most controllers, but if users
+ * experience issues such as asymmetric behavior around the deadband or
+ * inability to saturate the controller in either direction, calibration is
+ * recommended. The calibration procedure can be found in the Talon User
+ * Manual available from Cross the Road Electronics (CTRE).
+ *
+ * \li 2.037ms = full "forward"
+ * \li 1.539ms = the "high end" of the deadband range
+ * \li 1.513ms = center of the deadband range (off)
+ * \li 1.487ms = the "low end" of the deadband range
+ * \li 0.989ms = full "reverse"
+ */
+class Talon : public PWMMotorController {
+ public:
+  /**
+   * Constructor for a Talon connected via PWM.
+   *
+   * @param channel The PWM channel that the Talon is attached to. 0-9 are
+   *                on-board, 10-19 are on the MXP port
+   */
+  explicit Talon(int channel);
+
+  Talon(Talon&&) = default;
+  Talon& operator=(Talon&&) = default;
+};
+
+}  // namespace frc

wpilibc/src/generated/main/native/include/frc/motorcontrol/Victor.h

@@ -0,0 +1,43 @@
+// Copyright (c) FIRST and other WPILib contributors.
+// Open Source Software; you can modify and/or share it under the terms of
+// the WPILib BSD license file in the root directory of this project.
+
+// THIS FILE WAS AUTO-GENERATED BY ./wpilibc/generate_pwm_motor_controllers.py. DO NOT MODIFY
+
+#pragma once
+
+#include "frc/motorcontrol/PWMMotorController.h"
+
+namespace frc {
+
+/**
+ * Vex Robotics Victor 888 Motor Controller with PWM control.
+ *
+ * Note that the Victor 888 uses the following bounds for PWM values. These
+ * values should work reasonably well for most controllers, but if users
+ * experience issues such as asymmetric behavior around the deadband or
+ * inability to saturate the controller in either direction, calibration is
+ * recommended. The calibration procedure can be found in the Victor 888 User
+ * Manual available from Vex Robotics.
+ *
+ * \li 2.027ms = full "forward"
+ * \li 1.525ms = the "high end" of the deadband range
+ * \li 1.507ms = center of the deadband range (off)
+ * \li 1.490ms = the "low end" of the deadband range
+ * \li 1.026ms = full "reverse"
+ */
+class Victor : public PWMMotorController {
+ public:
+  /**
+   * Constructor for a Victor 888 connected via PWM.
+   *
+   * @param channel The PWM channel that the Victor 888 is attached to. 0-9 are
+   *                on-board, 10-19 are on the MXP port
+   */
+  explicit Victor(int channel);
+
+  Victor(Victor&&) = default;
+  Victor& operator=(Victor&&) = default;
+};
+
+}  // namespace frc

wpilibc/src/generated/main/native/include/frc/motorcontrol/VictorSP.h

@@ -0,0 +1,43 @@
+// Copyright (c) FIRST and other WPILib contributors.
+// Open Source Software; you can modify and/or share it under the terms of
+// the WPILib BSD license file in the root directory of this project.
+
+// THIS FILE WAS AUTO-GENERATED BY ./wpilibc/generate_pwm_motor_controllers.py. DO NOT MODIFY
+
+#pragma once
+
+#include "frc/motorcontrol/PWMMotorController.h"
+
+namespace frc {
+
+/**
+ * Vex Robotics Victor SP Motor Controller with PWM control.
+ *
+ * Note that the Victor SP uses the following bounds for PWM values. These
+ * values should work reasonably well for most controllers, but if users
+ * experience issues such as asymmetric behavior around the deadband or
+ * inability to saturate the controller in either direction, calibration is
+ * recommended. The calibration procedure can be found in the Victor SP User
+ * Manual available from Vex Robotics.
+ *
+ * \li 2.004ms = full "forward"
+ * \li 1.520ms = the "high end" of the deadband range
+ * \li 1.500ms = center of the deadband range (off)
+ * \li 1.480ms = the "low end" of the deadband range
+ * \li 0.997ms = full "reverse"
+ */
+class VictorSP : public PWMMotorController {
+ public:
+  /**
+   * Constructor for a Victor SP connected via PWM.
+   *
+   * @param channel The PWM channel that the Victor SP is attached to. 0-9 are
+   *                on-board, 10-19 are on the MXP port
+   */
+  explicit VictorSP(int channel);
+
+  VictorSP(VictorSP&&) = default;
+  VictorSP& operator=(VictorSP&&) = default;
+};
+
+}  // namespace frc