Update to 2018_v4 image and new build system. (#598)

* Revert "Force OpenCV to 3.1.0 (#602)"

This reverts commit 50ed55e8e2.

* Removes Simulation

* Removes old build system

* Removes old gtest

* Adds new gmock and gtest

* Updates to new ni-libraries

* removes MyRobot (to be replaced)

* moves files to new location

* Adds new sim backend and new test executables

* updates .styleguide and .gitignore

* Changes cpp WPILibVersion to a function

MSVC throws an AV with the old version.

* Disables USBCamera on all systems except for linux

* 2018 NI Libraries

* New build system

wpilibc/src/main/native/cpp/SolenoidBase.cpp

@@ -0,0 +1,138 @@
+/*----------------------------------------------------------------------------*/
+/* Copyright (c) FIRST 2008-2017. All Rights Reserved.                        */
+/* Open Source Software - may be modified and shared by FRC teams. The code   */
+/* must be accompanied by the FIRST BSD license file in the root directory of */
+/* the project.                                                               */
+/*----------------------------------------------------------------------------*/
+
+#include "SolenoidBase.h"
+
+#include "HAL/HAL.h"
+#include "HAL/Solenoid.h"
+
+using namespace frc;
+
+/**
+ * Constructor
+ *
+ * @param moduleNumber The CAN PCM ID.
+ */
+SolenoidBase::SolenoidBase(int moduleNumber) : m_moduleNumber(moduleNumber) {}
+
+/**
+ * Read all 8 solenoids as a single byte
+ *
+ * @param module the module to read from
+ * @return The current value of all 8 solenoids on the module.
+ */
+int SolenoidBase::GetAll(int module) {
+  int value = 0;
+  int32_t status = 0;
+  value = HAL_GetAllSolenoids(module, &status);
+  wpi_setGlobalErrorWithContext(status, HAL_GetErrorMessage(status));
+  return value;
+}
+
+/**
+ * Read all 8 solenoids as a single byte
+ *
+ * @return The current value of all 8 solenoids on the module.
+ */
+int SolenoidBase::GetAll() const {
+  return SolenoidBase::GetAll(m_moduleNumber);
+}
+
+/**
+ * Reads complete solenoid blacklist for all 8 solenoids as a single byte.
+ *
+ * If a solenoid is shorted, it is added to the blacklist and
+ * disabled until power cycle, or until faults are cleared.
+ * @see ClearAllPCMStickyFaults()
+ *
+ * @param module the module to read from
+ * @return The solenoid blacklist of all 8 solenoids on the module.
+ */
+int SolenoidBase::GetPCMSolenoidBlackList(int module) {
+  int32_t status = 0;
+  return HAL_GetPCMSolenoidBlackList(module, &status);
+}
+
+/**
+ * Reads complete solenoid blacklist for all 8 solenoids as a single byte.
+ *
+ * If a solenoid is shorted, it is added to the blacklist and
+ * disabled until power cycle, or until faults are cleared.
+ * @see ClearAllPCMStickyFaults()
+ *
+ * @return The solenoid blacklist of all 8 solenoids on the module.
+ */
+int SolenoidBase::GetPCMSolenoidBlackList() const {
+  return SolenoidBase::GetPCMSolenoidBlackList(m_moduleNumber);
+}
+
+/**
+ * @param module the module to read from
+ * @return true if PCM sticky fault is set : The common highside solenoid
+ *         voltage rail is too low, most likely a solenoid channel is shorted.
+ */
+bool SolenoidBase::GetPCMSolenoidVoltageStickyFault(int module) {
+  int32_t status = 0;
+  return HAL_GetPCMSolenoidVoltageStickyFault(module, &status);
+}
+
+/**
+ * @return true if PCM sticky fault is set : The common highside solenoid
+ *         voltage rail is too low, most likely a solenoid channel is shorted.
+ */
+bool SolenoidBase::GetPCMSolenoidVoltageStickyFault() const {
+  return SolenoidBase::GetPCMSolenoidVoltageStickyFault(m_moduleNumber);
+}
+
+/**
+ * @param module the module to read from
+ * @return true if PCM is in fault state : The common highside solenoid voltage
+ *         rail is too low, most likely a solenoid channel is shorted.
+ */
+bool SolenoidBase::GetPCMSolenoidVoltageFault(int module) {
+  int32_t status = 0;
+  return HAL_GetPCMSolenoidVoltageFault(module, &status);
+}
+
+/**
+ * @return true if PCM is in fault state : The common highside solenoid voltage
+ *         rail is too low, most likely a solenoid channel is shorted.
+ */
+bool SolenoidBase::GetPCMSolenoidVoltageFault() const {
+  return SolenoidBase::GetPCMSolenoidVoltageFault(m_moduleNumber);
+}
+
+/**
+ * Clear ALL sticky faults inside PCM that Compressor is wired to.
+ *
+ * If a sticky fault is set, then it will be persistently cleared.  Compressor
+ * drive maybe momentarily disable while flags are being cleared. Care should
+ * be taken to not call this too frequently, otherwise normal compressor
+ * functionality may be prevented.
+ *
+ * If no sticky faults are set then this call will have no effect.
+ *
+ * @param module the module to read from
+ */
+void SolenoidBase::ClearAllPCMStickyFaults(int module) {
+  int32_t status = 0;
+  return HAL_ClearAllPCMStickyFaults(module, &status);
+}
+
+/**
+ * Clear ALL sticky faults inside PCM that Compressor is wired to.
+ *
+ * If a sticky fault is set, then it will be persistently cleared.  Compressor
+ * drive maybe momentarily disable while flags are being cleared. Care should
+ * be taken to not call this too frequently, otherwise normal compressor
+ * functionality may be prevented.
+ *
+ * If no sticky faults are set then this call will have no effect.
+ */
+void SolenoidBase::ClearAllPCMStickyFaults() {
+  SolenoidBase::ClearAllPCMStickyFaults(m_moduleNumber);
+}