Renamed folders for consistency, using sim/athena/shared schema (#27)

Rename the following folders:
hal/lib/Athena -> hal/lib/athena
hal/lib/Desktop -> hal/lib/sim
hal/lib/Shared -> hal/lib/shared
wpilibc/Athena -> wpilibc/athena
wpilibc/simulation -> wpilibc/sim

Windows users may need to run gradlew clean after updating.

wpilibc/athena/include/AnalogTriggerOutput.h

@@ -0,0 +1,65 @@
+/*----------------------------------------------------------------------------*/
+/* Copyright (c) FIRST 2008-2016. All Rights Reserved.                        */
+/* Open Source Software - may be modified and shared by FRC teams. The code   */
+/* must be accompanied by the FIRST BSD license file in the root directory of */
+/* the project.                                                               */
+/*----------------------------------------------------------------------------*/
+
+#pragma once
+
+#include "DigitalSource.h"
+
+class AnalogTrigger;
+
+/** Class to represent a specific output from an analog trigger.
+ *  This class is used to get the current output value and also as a
+ * DigitalSource to provide routing of an output to digital subsystems on the
+ * FPGA such as Counter, Encoder, and Interrupt.
+ *
+ * The TriggerState output indicates the primary output value of the trigger.
+ * If the analog signal is less than the lower limit, the output is false.  If
+ * the analog value is greater than the upper limit, then the output is true.
+ * If the analog value is in between, then the trigger output state maintains
+ * its most recent value.
+ *
+ * The InWindow output indicates whether or not the analog signal is inside the
+ * range defined by the limits.
+ *
+ * The RisingPulse and FallingPulse outputs detect an instantaneous transition
+ * from above the upper limit to below the lower limit, and vise versa.  These
+ * pulses represent a rollover condition of a sensor and can be routed to an up
+ * / down couter or to interrupts.  Because the outputs generate a pulse, they
+ * cannot be read directly.  To help ensure that a rollover condition is not
+ * missed, there is an average rejection filter available that operates on the
+ * upper 8 bits of a 12 bit number and selects the nearest outlyer of 3 samples.
+ * This will reject a sample that is (due to averaging or sampling) errantly
+ * between the two limits.  This filter will fail if more than one sample in a
+ * row is errantly in between the two limits.  You may see this problem if
+ * attempting to use this feature with a mechanical rollover sensor, such as a
+ * 360 degree no-stop potentiometer without signal conditioning, because the
+ * rollover transition is not sharp / clean enough.  Using the averaging engine
+ * may help with this, but rotational speeds of the sensor will then be limited.
+ */
+class AnalogTriggerOutput : public DigitalSource {
+  friend class AnalogTrigger;
+
+ public:
+  virtual ~AnalogTriggerOutput();
+  bool Get() const;
+
+  // DigitalSource interface
+  virtual uint32_t GetChannelForRouting() const override;
+  virtual uint32_t GetModuleForRouting() const override;
+  virtual bool GetAnalogTriggerForRouting() const override;
+
+ protected:
+  AnalogTriggerOutput(const AnalogTrigger& trigger,
+                      AnalogTriggerType outputType);
+
+ private:
+  // Uses reference rather than smart pointer because a user can not construct
+  // an AnalogTriggerOutput themselves and because the AnalogTriggerOutput
+  // should always be in scope at the same time as an AnalogTrigger.
+  const AnalogTrigger& m_trigger;
+  AnalogTriggerType m_outputType;
+};