- CANJaguar also touched up to report it can't do the new control mode (just like with follower).
- New third optional param for talon c'tor to speed up enable control frame.
- The pulse width routines have been moved to where the script generator puts them. No actual changes there but should help Peter integrate the latest code generator.
Last feature additions for TalonSRX HAL for FRC2015-FRC-2016 season.
-HAL driver uses control_5 frame if firmware supports it. This allows teams to see/confirm control settings taking effect before enabling the robot.
For example selecting the sensor type and going to web-dash to check sensor values now works without having to enable the robot.
-Motion profile HAL routines added. Tested on Single-Speed Double reduction (with slave Talon too).
-Start moving ctre frame defs into a new common header (better then shoving a bunch of struct defs at top of module).
-New child class in CANTalonSRX for buffering motion profile points. Not sure it would be best to leave it as is or make another module. It's trivial now so I thought that was acceptable, (in future it will likely possess compression strategies => no longer trivial).
Change-Id: I803680c1a6669ca3f5157d7875942def6f75b540
New functions were added to CanTalonSRX in the HAL, however they were
not added to the C side of the library.
Change-Id: I15197e5dce5db0f5ff207d1318c21be485c90741
Rebuilt last SRX-related commit with latest checkout.
Change-Id: I9f10418580275dae5cd07d740d401d45ee44e276
C++: Added Magnetic Encoder sensor types
C++: API for changing status frame rates updated to use paramEnums.
C++: Added Setting nominal and peak outputs for closed loop modes.
C++: Added current-closed loop
C++: added vcomp mode
C++: Added unit scaling (rotations and rpm)
C++ Added allowableclosedlooperr
C++: Added auto zero position on index pin
C++: Added pulse width decoder API
C++: Added multiplicands in status frames, increasing the max reported pos and max rpm.
C++: Added SetClosedLoopOutputDirection() for reversing slave output and reversing single-direction closed loopoutput.
C++: Added generic ConfigSet and ConfigGet for future flexibility/features.
C++: Added IsSensorPresent
Java: Added Magnetic Encoder sensor types
Java: Added unit scaling (rotations and rpm)
Java: Added current-closed loop
Java: added vcomp mode
Java Added allowableclosedlooperr
Java: Added auto zero position on index pin
Java: Added pulse width decoder API
Java: setForwardSoftLimit and setReverseSoftLimit takes double instead of int so underneath we can support rotations instead of native units.
Java: Added generic SetParam and GetParam for future flexibility/features.
Java Added isSensorPresent
Change-Id: I800251510e411624dce5ee10272606c31764b8ab
Change-Id: If2218df082bca93d25b88088696d6c2897732efd
Adding FRC Local new mdns name
Change-Id: I53d206879663b96009ba3a12de161b7a425ffd10
Adding rpath for new libstdc++
Change-Id: I0c022efb0b15f094d153b44f60215ca00d5f1924
This both disables the CANTalon in the CANTalon class (which
should be redundant) and stops sending control signals in the
CanTalonSRX hal class.
Change-Id: I63d6a9d016c221e385d5d5a3679d854882ac6650
Java...
added setStatusFrameRateMs() to modify the frame rate for status frames
added missing func that already exists in c++
isFwdLimitSwitchClosed()
isRevLimitSwitchClosed()
getNumberOfQuadIdxRises()
getPinStateQuadA()
getPinStateQuadB()
getPinStateQuadIdx()
added getAnalogInRaw() that doesn't count overflows (for potentiometers).
added setStatusFrameRateMs() to modify the frame rate for status frames
added getBrakeEnableDuringNeutral()
C++...
added GetAnalogInRaw() that doesn't count overflows (for potentiometers).
added SetStatusFrameRateMs() to modify the frame rate for status frames
added GetBrakeEnableDuringNeutral()
added kLimitMode_SrxDisableSwitchInputs to CANSpeedController::LimitMode
Patch set 2: Joe Ross, fixed two javadoc errors
Change-Id: I0bf871e138953de60eeacb547dc359f2125b1327
The param is capped in the HAL C++ class to [1ms, 95ms] so that zero and negative periods are caped to 1ms, and so that caller can't pass an absurdly large value, which causes TALON is appear disabled.
Change-Id: I4207194be25a33bbd6ad281a75301ce6684659a5
usleep added to the getters that require a little time for solicted response (getPIDF, getIzone, and getFirmwareVers.
Tested against the TALON SRX unit test originally written for CanTalonSrx HAL class.
Change-Id: I7e75b8b63ac9ffecb5d48b87cbe0e0ee05bbb5a2
Tested analog PID in Java and C++.
Changed to default to controlEnabled.
Loosely wrapped a bunch of CanTalonSRX functions in Java.
Change-Id: I9da380e2368d9a72f08be4434ac63b5710a9f90f
There are some redundant TALON fixes in this particular commit, hopefully it handles ok on Jenkins.
Tested with Talon SRX Unit Test (firm 0.34)
Change-Id: I67db546fea2867cc6bd53ea26dc1cb61ac106490
I also updated the C++ and Java code some. For C++, this meant making it
compile and adding in the framework for the closed-loop control of the
motor. For Java, I updated the JNI bindings with SWIG and created an
GetTemperature accessor function to demonstrate how to use the accessors
because swig does funny stuff with pass-by-reference functions.
Change-Id: If51bf61d0a9bc65a8d497f8d91a5be8d6ff4fdcc
Currently, the JNI bindings are generated by Swig and, unfortunately,
the interface available through Java is lower-level than that for C++
(ie, direct access to the ctre code through the JNI bindings, rather
than an interface on top of that), but it does work.
See eclipse plugins for some short samples.
There are a couple of short unit tests as placeholders.
Still needs some cleaning up.
Change-Id: Iae2f74693ca6b80bf7d5aca0625c66aa6e0b7f85
Added quick samples for C++/Java CAN Talon stuff.
Change-Id: I3acb27d6fd5568d88931e0d678c09973d436735d
