fmtlib uses consteval format string processing, which makes it more
efficient than std::snprintf().
snprintf()s in libuv, mpack, processstarter, and wpigui were left alone.
processstarter uses stdlib only, and wpigui only depends on imgui.
fmt::format_to_n() is analogous to std::format_to_n()
(https://en.cppreference.com/w/cpp/utility/format/format_to_n)
wpi::format_to_n_c_str() is a wrapper which adds the trailing NUL.
The following source code changes were required:
* Whitespace changes from spotless
* PMD warning suppressions for utility class tests
* PMD warning rename from "BeanMembersShouldSerialize" to
"NonSerializableClass"
* Declared more class members as final
Current timestamp read code uses FPGA register reads. Through testing,
this read was slower then clock_gettime by about 4-5x. However, another
method of reading the FPGA time is available, using HMB. HMB
is memory mapped IO from RAM to the FPGA. So to code side,
reading the value is just a memory barrier and a memory read.
There is some latency on the write side, so a very small artifical delay
(5us) is added to avoid register reads such as interrupts being ahead
of current timestamps, which could cause issues.
Below is read times for 1000 calls to clock_gettime, register reads and
hmb reads.
```
Clock: Rise 1.72939400 s Fall 1.72990700 s Delta 0.00051300 s
FPGA : Rise 1.72999000 s Fall 1.73429300 s Delta 0.00430300 s
HMB : Rise 1.73466800 s Fall 1.73481900 s Delta 0.00015100 s
```
Also add full HMB struct to HAL for future usage.
This works around an exit race with wpi::Now() on Rio; it was overridden
to call HAL_GetFPGATime(), which calls chipobject, but on exit, because
there was not a library dependency, the chipobject could be destroyed
prior to wpiutil/wpinet being shut down.
Many teams have issues trying to read the DS too early. By switching to an optional, we cause teams to check 2 things. Either 1) they explicitly check, and their code is correct, or 2) they just read .value() and their code reboots in a loop. However, because the DS will eventually connect, this 2nd case is ok, and should theoretically be undetectable on the field.
Setting one will set the others, like it does in real hardware.
Add tests for boundary conditions and conversions.
Update PWM sendable implementation to include all forms.
Fixes#5264Fixes#3606
HAL_SetAddressableLEDBitTiming swapped high and low timings for whatever
was written to it. This fixes that bug.
Additionally, the API has been updated to take high time first, and then
low time. This is due to this being the physical data format, so having
the API match is clearer.
Additionally, update the docs with the defaults.
