Previously, negative output voltages were unpacked incorrectly.
Now, they're requested as percentages, unpacked, and then scaled
in software based on the bus voltage. The output voltage and
bus voltage shouldn't ever be out of sync, since they're in
the same message.
Change-Id: I745fffd0faa6cbaab967240271e6cfa8653212e2
You can get the state of the USER button with GetUserButton() in
C++ or Utility.getUserButton() in java.
Change-Id: I923e62cab5e621ef43fed503acab5c0d751264fb
Calling CANJaguar::Disable() now makes NetComms stop periodic
setpoint messages, so the motor actually stops until EnableControl()
is called again.
Change-Id: Ib4eb4ad5f729be5c74e799f02ed000511de1e03d
Percent mode used to be scaled incorrectly in Java because the
max output voltage was initialized to a wrong value.
Change-Id: If88bb2f1d198e13b1724afc62a522fbf91a14b5b
The CANJaguar class now stores a controlEnabled flag. When disabled, it
won't verify the control mode, which involves sending enable messages.
Change-Id: I8baa48eec31de6b4d3fee2b5a074320542a1bbef
Adds a simple logger to the AbstractComsSetup that prints messages to the console based on the log level.
Replaces all System.out prints with TestBench.out()
Change-Id: Ieb7acfe51aa2febe9cfd3883f8a33094c9b72a6e
This previous caused a bug where the Jaguar would sometimes
behave as if it were in the wrong mode, even when everything was
verfied.
Change-Id: Id5b96e0f7e64066eaaa0e5be4ba53fca76ba0703
wpilibJavaDevices now contains RoboRIO specific code and wpilibJava has
shared high level information. The restructuring was mostly just copy
and paste. The three big exceptions are Timer, RobotState and
HLUsageReporting. Those require some dependencies injection since that
appears to be the cleanest way to share the code.
Change-Id: Ie7011e32bc95953a87801a9905b3bfec7f8de285
Updates the test bench to only print "Waiting for enable" on one line with a counter.
Updates all SubSuites to extend the AbstractTestSuite class.
Also includes a small set of tests to prove the validity of the base AbstractTestSuite
Change-Id: I447ca2537a08c84ab1d69fa200cb8125b448a589
ADXL345_I2C, ADXL345_SPI, and BuiltInAccelerometer implement this interface.
The analog accelerometer class Accelerometer was renamed to
AnalogAccelerometer.
Change-Id: Iaae79d582a24c36c372f5fd4ea6df37be289b9c1
Pneumatics still have CAN modules. The refactored code is now eight
plugins for sensors and actuators. There is some code reuse that should
be refactored out, but that level of abstraction will wait until we
figure out how these plugins are integrating with gazebo proper.
Change-Id: I357e695ef05af6dda83a39ba60380686bd57d11a
Closes: artf2610, artf2623
Removed #if 0...#endif from PCM.cpp
Change-Id: I2d117c87a3fa10bddebf83706f79c2e767d22a0d
Update the HAL to the PCM/PDP changes
Change-Id: If554b650e263f174e90864f1e9ffba91daf20f7e
Update C++ to the PCM/PDP changes
Change-Id: Ia3114d4526be1dc5cc2f74fd8f7ab44f204d15f2
Updated PCM/PDP in Java
Change-Id: I8fe03afbcb1739d555e86abc0eaae1e12313d490
Previously, the voltage was requested as a percentage and decoded as
a number of volts, which resulted in values being scaled wrong. The
correct message is requested now.
Change-Id: I5e81c7a4a2e2698f2e8a84ba747217e0e14f7676
All status data is now in 3 messages automatically sent periodically
by the Jaguar, removing the need to send several hundred requests
every second.
The C++ integration test was also updated to be more robust against
timing problems.
Change-Id: I13bacc6c8173ea1a2291a96ad3bd80ff5b18d16f
