The wpimath library is a new library designed to separate the reusable math functionality
from the common utility library (wpiutil) and the hardware-dependent library (wpilibc/j).
Package names / include file names were NOT changed to minimize breakage. In a future year
it would be good to revamp these for a more uniform user experience and to reduce the risk
of accidental naming conflicts.
While theoretically all of this functionality could be placed into wpiutil, several pieces
of this library (e.g. DARE) are very time-consuming to compile, so it's nice to avoid this
expense for users who only want cscore or ntcore. It also allows for easy future separation
of build tasks vs number of workers on memory-constrained machines.
This moves the following functionality from wpiutil into wpimath:
- Eigen
- ejml
- Drake
- DARE
- wpiutil.math package (Matrix etc)
- units
And the following functionality from wpilibc/j into wpimath:
- Geometry
- Kinematics
- Spline
- Trajectory
- LinearFilter
- MedianFilter
- Feed-forward controllers
This uses Dear Imgui to provide a cross-platform integrated GUI for robot
simulation. The GUI provides fully integrated DS and joystick support so it's
not necessary to run the official DS.
This implements enough of the UDP and TCP protocol used by the FRC
driver station to allow us to talk to either QDriverStation or to the
real Driver Station.
This was inspired by a similar function in Toast by Jaci, and also
uses a lot of the research found in the QDriverStation project.
The models and meshes are not included. We will need
to find an alternate way to reintegrate these and use them.
* Add simulation/gz_msgs back, and build with Gradle.
* Add back in the frc simulation plugins for gazebo.
* Add a new shared library, halsim_gazebo.
This library will become the interface between the
HAL sim layer and gazebo.
* Preserve the first channel number used in created Encoders in the Sim MockData.
This allows us to use the DIO channel number to connect with simulated encoders.
* Have the HAL Simulator set the reverse direction on creation.
This enables a simulator to be aware of the direction.
* Add a drive_motor plugin.
This is a bit of a 'magic' motor, which allows us to build robot
models that drive in a more realistic fashion. It does this
by apply forces directly to the chassis, rather than relying on
the complex motion dynamics of a driven wheel.
This in turn allows the model to reduce wheel friction,
reducing scrub, and allowing for a more natural driving experience.
* Modify halsim to be able to load extension libraries if they are available.
It will read the list of libraries to try from the HALSIM_EXTENSIONS
environment variable. Multiple libraries can be given if separated
by ';' (Windows) or ':' (Unix).
The library must have an 'HALSIM_InitExtension' method that returns >= 0 on success.
The library is expected to use the interface expressed by
hal/src/src/main/native/include/MockData
* Add a simple halsim library that just prints robot values.
This makes a good test bed for cross platform purposes,
and provides the ultimate in light weight simulators.
This initial version only prints PWM values.
* Move examples to allwpilib
* Add checkstyle config to examples project
* Ran wpiformat
* Run checkstyle on examples
* Change maximum line length for examples to 80 chars
This number was chosen based on testing of the number of characters shown by default in Eclipse done by @Kevin-OConnor: 51 chars by default on an E09 @ 1024x600 (which has the welcome window open on the right), 71 with welcome closed, 95 with the right-hand outline pane closed
* Add mavenCentral repository
* Rename subproject & error on deprecated API use
* Remove deprecated API usage
* Revert "Force OpenCV to 3.1.0 (#602)"
This reverts commit 50ed55e8e2.
* Removes Simulation
* Removes old build system
* Removes old gtest
* Adds new gmock and gtest
* Updates to new ni-libraries
* removes MyRobot (to be replaced)
* moves files to new location
* Adds new sim backend and new test executables
* updates .styleguide and .gitignore
* Changes cpp WPILibVersion to a function
MSVC throws an AV with the old version.
* Disables USBCamera on all systems except for linux
* 2018 NI Libraries
* New build system
This does a major cleanup on our gradle files, primarily converting all instances of manual dependency downloading to use the correct configuration-based method, which has the advantage of being both less code and more safe.
To publish the simulation zip, run ./gradlew publish -PmakeSim
Targeting Ubuntu 14.04 and 15.10 for now, with 14.04 being the
currently best supported.
Two scripts have been drafted for installing, for 14.04 and 15.10
It currently publishes to ~/releases/maven/development/simulation
There is a known bug that gz_msgs for 15.10 must be built using
protobuf 2.6, which is not the default on 14.04.
Change-Id: I6cccd601671553d30fd05bbbc79c2b7dc1efbf1d
This is a major restructuring of the WPILib repository to simply build
procedures and remove the remnants of Maven from everything except the
eclipse plugins. Gradle files have been largely simplified or rewritten,
taking advantage of splitting up parts of the build into separate build
files for ease of reading.
The eclipse plugins are now in a separate project, as is ntcore. All
dependencies are resolved via Maven dependencies, with the
Jenkins-maintained WPILib repo. Project structures have also been
simplified: we no longer have separate subprojects inside wpilibc and
wpilibj. Where possible, these changes hav been done with git renames,
to make sure we still have full history for all repositories. Other
unrelated subprojects have also been broken out: OutlineViewer is now a
separate project.
Change-Id: Ib4e2a6e1a2f66427a14f16612b0e0d69ed661878
This commit does a few things. First, we publish ntcore as a maven
artifact so the plugins can build with new networktables, and java
programs will depend on the correct version when compiled. We also revert
the changes to OutlineViewer for now. I got an exception when attempting
to start a server with the new network tables in OutlineViewer on Windows,
I will create a bug for this. Also, since we don't have the binaries
integrating properly yet and won't for the first beta, we need to be using
the platform agnostic version anyway.
Change-Id: I9960f25bc3f2b30bb59fce665eb914ef5e661c9c
Also make sure table listeners stop listening in their destructors. This
might be better handled by moving the table itself into ITableListener and
providing cleanup functionality there.
A submodule is used to pull in ntcore.
Change-Id: I3031c1a768595cf0f8754c47e15cd423e2dbcce5
This adds gradle support for building wpilibj and wpilibc. At this
point, both of these libraries should be fully ready to go.
Gradle should give us a number of improvements, including less
dependencies for getting building up and running, and MUCH faster build
times. I'm noticing significantly faster build times already compared to
Maven, with neither system building the plugins. The changes here should
be pretty straight forward. The basic command for gradle is './gradlew'.
This is the gradle wrapper, and it will find and download the correct
gradle executable for your system. There is no need to install anything
yourself. To see every task available, run './gradlew tasks'. The
important tasks for us are listed under the WPILib header when the tasks
command is run. To generate unit test binaries, the
fRCUserProgramExecutable command will create the C++ tester, and the
wpilibjIntegrationTestJar command will create the Java tester. The Jenkins
deploy scripts have been modified to know the difference between maven
generated and gradle generated jars with an environment variable. Creating
the eclipse plugins still requires Maven, but gradle will handle calling
it correctly and generating the proper dependencies for it. Create the
plugins by calling ./gradlew eclipsePlugins.
Jenkins can now be modified to support the new build system. Unit tests
are run with ./gradlew test. Generating the integration tests uses the
above two commands, and then process proceeds exactly as it did before.
For publishing documentation, a new task has been created, ./gradlew
publishDocs, which handles putting the documentation where Jenkins expects
for publishing.
Change-Id: I9a260d391984f98ef9170993efe933e4026161dc
