Modules aren't used anymore in wpilibc and wpilibj, so the hal functions
that references them and and JNI bindings for these functions have been
pulled out.
Both Counter classes were also modified because they still referenced
modules.
Change-Id: Ic01feb145a4ed5f08cd55f140867c721f5ee7b10
Analog triggers now work in Java.
Integration tests for analog triggers are included.
A message in the C++ analog trigger IT was fixed.
Change-Id: I50007c6901b8391d32c0e81becdbe18e48a7840f
Analog accumulators now wait for the amount of time a full sample
(including oversampling and averaging) lasts after
AnalogInput::ResetAccumulator() is called, so they don't return
old values after being reset.
This delay should be microseconds long and will only happen
when an accumulator is reset.
A new test is is the C++ TiltPanCameraTest that tests this behavior
with the Gyro class.
Change-Id: I1b3ffdeec187959f95c5e637a6d428c9a4bc2cf4
If the gyro was initialized with an analog input the gyro class would not be calibrated properly.
Removes unnecessary type casting.
Change-Id: I6baa72919019a33cce7d3074f8477104cbe65396
This allows the robot base setup to be used for the robot base as well as the setup for the test system.
Change-Id: I2f8e37d42c84001f4b4eff2afd7c3e1d73785d7c
Constructing a new HardwareTimer before HALInitialize is called
causes segfaults sometimes in user programs, since getFPGATime assumes
that the tGlobal objected was constructed. This problem did not appear
in integration tests, where the calls were in the correct order.
Change-Id: I95471e9e8ad7bc5d48a65893856089e35c0b091a
Switches the PDP test to use the MotorEncoderFixture.
Also adds helpful output information when running MotorEncoderTests by displaying the current MotorEncoder under test
Change-Id: I1d14986a6ff0ebfffa87d2fd8077d7dd1eef50e3
Previously, negative output voltages were unpacked incorrectly.
Now, they're requested as percentages, unpacked, and then scaled
in software based on the bus voltage. The output voltage and
bus voltage shouldn't ever be out of sync, since they're in
the same message.
Change-Id: I745fffd0faa6cbaab967240271e6cfa8653212e2
You can get the state of the USER button with GetUserButton() in
C++ or Utility.getUserButton() in java.
Change-Id: I923e62cab5e621ef43fed503acab5c0d751264fb
Calling CANJaguar::Disable() now makes NetComms stop periodic
setpoint messages, so the motor actually stops until EnableControl()
is called again.
Change-Id: Ib4eb4ad5f729be5c74e799f02ed000511de1e03d
Percent mode used to be scaled incorrectly in Java because the
max output voltage was initialized to a wrong value.
Change-Id: If88bb2f1d198e13b1724afc62a522fbf91a14b5b
The CANJaguar class now stores a controlEnabled flag. When disabled, it
won't verify the control mode, which involves sending enable messages.
Change-Id: I8baa48eec31de6b4d3fee2b5a074320542a1bbef
Adds a simple logger to the AbstractComsSetup that prints messages to the console based on the log level.
Replaces all System.out prints with TestBench.out()
Change-Id: Ieb7acfe51aa2febe9cfd3883f8a33094c9b72a6e
This previous caused a bug where the Jaguar would sometimes
behave as if it were in the wrong mode, even when everything was
verfied.
Change-Id: Id5b96e0f7e64066eaaa0e5be4ba53fca76ba0703
wpilibJavaDevices now contains RoboRIO specific code and wpilibJava has
shared high level information. The restructuring was mostly just copy
and paste. The three big exceptions are Timer, RobotState and
HLUsageReporting. Those require some dependencies injection since that
appears to be the cleanest way to share the code.
Change-Id: Ie7011e32bc95953a87801a9905b3bfec7f8de285
Updates the test bench to only print "Waiting for enable" on one line with a counter.
Updates all SubSuites to extend the AbstractTestSuite class.
Also includes a small set of tests to prove the validity of the base AbstractTestSuite
Change-Id: I447ca2537a08c84ab1d69fa200cb8125b448a589
