Trigger was refactored to use BooleanEvent when it was introduced in #4104.
This reverts to the original implementation until edge-based BooleanEvents can be fixed.
Comparison operators which compared against every class member variable
now use C++20's default comparison operators.
Also remove operator!= that in C++20 is now auto-generated from operator==.
This leaves the file format as a list, but internally will transform the collection of tags into a map on de/serialization. The serialization will probably happen once on startup, but the tag lookup can happen 100s of times a second. This honestly probably doesn't make too much of a performance hit since N is small, but this is a simple O(n) -> O(1) change for lookups.
This is an API for looking up a Pose3d from a tag id, and includes functionality to load that map from a JSON file.
This also adds JSON support to Pose3d, Rotation3d. Translation3d, and Quaternion.
Co-authored-by: Tyler Veness <calcmogul@gmail.com>
Co-authored-by: AMereBagatelle <themerebagatelle@gmail.com>
Motivation
Feedback from 2022 showed that the Trigger API is rather confusing, mostly due to the following:
- duplicate Trigger and Button APIs were available; users were confused searching for a nonexistent difference between them.
- the when terminology was ambiguous and unclear whether it refers to the high state or specifically the rising edge.
- the Active terminology didn't unambiguously refer to the high state; it wasn't unintuitive to understand it as "when the binding is active/polled".
- whileHeld vs whenHeld was very confusing, and the difference between them wasn't obvious. The parallel Trigger verbs, whileActiveContinuously and whileActiveOnce are much less confusing.
Solution
Deprecating Button and its binding methods. The rationale for deprecating Button (and not Trigger) is because Button uses terminology that is needlessly more specific and restricting to the button use case, making the use case of arbitrary trigger conditions unintuitive.
After consideration, deprecation of Button's subclasses was decided against:
- NetworkButton (a trigger condition based on a boolean NT entry/topic) is a use case that is not necessarily intuitive for teams to implement themselves, so it is an abstraction that should be provided in the library. A parallel class for the BooleanEvent level, NetworkBooleanEvent, was also added as part of NT4. NT listeners were considered as a alternative solution, but they require attention to thread safety, and aren't interoperable with the EventLoop API.
- JoystickButton/POVButton provide abstractions around HID buttons. The new Trigger-returning factories on the HID classes are an equal (if not more concise) alternative, but there is no reason not to keep them for those who find their use preferable.
At a later date in the deprecation cycle (perhaps for 2024), when Button is removed, these subclasses should be changed to inherit directly from Trigger.
Trigger's bindings are changed to use True/False terminology, as it should be unambiguous. Each binding type has both True and False variants; for brevity, only the True variants are listed here:
- onTrue (replaces whenActive): schedule on rising edge.
- whileTrue (replaces whileActiveOnce): schedule on rising edge, cancel on falling edge.
- toggleOnTrue (replaces toggleWhenActive): on rising edge, schedule if unscheduled and cancel if scheduled.
Two binding types are completely deprecated:
- cancelWhenActive: this is a fairly niche use case which is better described as having the trigger's rising edge (Trigger.rising()) as an end condition for the command (using Command.until()).
- whileActiveContinuously: however common, this relied on the no-op behavior of scheduling an already-scheduled command. The more correct way to repeat the command if it ends before the falling edge is using Command.repeatedly/RepeatCommand or a RunCommand -- the only difference is if the command is interrupted, but that is more likely to result in two commands perpetually canceling each other than achieve the desired behavior. Manually implementing a blindly-scheduling binding like whileActiveContinuously is still possible, though might not be intuitive.
Notes
It was considered to share BooleanEvent's digital signal terminology; however, once it was decided that Trigger should not inherit from BooleanEvent (due to overload incompatibility) the common terminology was not worth the unintuitiveness stemming from users' unfamiliarity with the signal processing terms.
All trigonometric functions and vector classes assume North-West-Up axes
convention, so using North-East-Down convention with them is really
error-prone. We've broken something every time we touched the drive
classes.
We originally used North-East-Down to match the joystick convention, but
the volume of long-lived bugs has made this not worth it in retrospect.
The rest of WPILib also uses North-West-Up, so this makes things
consistent.
KilloughDrive was removed since no one uses it.
- In both C++ and Java, add listener functions to Instance class (same as NT3 provided)
- Add WaitForListenerQueue functions (same as NT3 provided)
- Move Java non-poller implementation to Instance (previously only handled single instance)
- Change C++ listeners to take non-const references for subscribers etc to help avoid footguns from use of temporary objects (also add doc comment)
- Fix Preferences making .type persistent
This avoids the need for explicit value() calls (as compared to using
DoubleTopic). The unit name is published as the "unit" property.
Implementation note: the test needs to be in wpilibc because ntcore does
not depend on wpimath.
* TopicListener: Fix Add() return values
* Update PubSubOption poll storage documentation
* Update NetworkTableEntry::GetValue() doc
* Add documentation regarding asynchronous callbacks
* Unpublish entry: set publisher to nullptr
* Implement ValueListenerPoller default constructor
* Remove SetNetworkIdentity, make parameter to StartClient
* URI-escape client ID, improve error message
* Add connected message with client id; also improve disconnected message a bit
* Handle SetServers either before or after StartClient
* Fix client use-after-free; also delay reconnect after disconnect to rate limit
* Don't re-announce to already subscribed client; we especially don't want to send the last value again
* Always accept in-order sets, only use timestamp for tiebreak
* Fix LocalStorage::StartNetwork race
* Remove unused/unimplemented function
Also:
* [glass] Remove debug print
* [glass] Fix mpack string decoding
* [cameraserver] Fix up startclient
The current DS thread model has some pretty major issues. It makes it difficult to know if all data is from the same remote packet, and if the data changes while the robot loop is running. Additionally, the DS thread is used for a few other things (MotorSafety and State Tracking for EducationalRobot). This also makes sim difficult, as user code has to wait for the thread to know it has new data.
This change completely rethinks how threading works in the driver station model.
First, the DS HAL system receives a new data callback, either from Netcomm or DriverStationSim. Inside the context of this callback, all the low latency data is read and put into a cache. Doing some investigation on the robot side, this is perfectly safe to do, and also ensures a ds packet will not be parsed before we finish reading the current packet data.
After all data is read, the cache is swapped with a 2nd buffer. This buffer just stores the data, none of the HAL DS calls read from this buffer. An event is then fired, stating there is new data ready to go.
Robot code calls HAL_UpdateDSData(). This swaps the 2nd buffer with a 3rd buffer, which always contains the current data. This data will not be updated until HAL_UpdateDSData is called again. Which solves the state problem.
The high level driver station classes have. an updateData() call, which calls HAL_UpdateDSData, and then update button state variables, then data log and update the NT FMS data table (Java also caches across the JNI boundary here, but that could trivially be removed). An extra event provider is provided, allowing other threads to know when this call has been completed.
IterativeRobotBase calls DS.updateData() at the beginning of each loop, and only once per loop. This means all commands will always have the same state.
All of this means there is no longer a DS thread. Everything happens synchronously. This means Sim and testing is easier, as you can just call DriverStationSim.NotifyNewData(), and then DriverStation.UpdateData(), and you can guarantee that all the DriverStation.*** data is up to date.
As for Motor Safety and Educational Robot State Handling, those can all be handled by their own threads. The Educational Thread only needs to run under EducationalRobot, and MotorSafety will only be started if there is a motor safety object enabled.
This is enabled by the C++20 __VA_OPT__ feature.
Uses of "{}" format string were updated.
Some warning suppressions were required for older clang versions.
Also improve codegen of wpi::Logger::Log(), frc::ReportError(), and frc::MakeError();
these generate better and less redundant code if they use fmt::string_view for the
format string instead of templating on it.
* Use explicit this capture required by C++20
* Use C++20 span
* Replace wpi::numbers with std::numbers
* Fix C++20 clang-tidy warning false positive in fmt
* Remove ciso646 include since C++20 removed that header
* Fix global-buffer-overflow asan warnings in ntcore tests
* Add DIOSetProxy constructor to HAL
* Upgrade MSVC compiler to 2022
* Bump native-utils to 2023.2.7 (changes to std=c++20)
Co-authored-by: Peter Johnson <johnson.peter@gmail.com>
The existing raw time has an issue where it jumps around, as in the FPGA if the frequency is not a multiple or divisor of 25 Mhz it jumps around by 1 every second. While waiting on an FPGA change, update the API to make raw output give nanoseconds rather then a scaled value. This does a longer read cycle to get the correct value, but in the future if a fast FPGA function is added this can be easily changed.
Checkstyle naming conventions were changed to allow most of what's in
wpimath. Naming rules were disabled completely in wpimath since almost
all suppressions are for math notation.
SPI Mode setting was very broken. MSB and LSB sets did not work (MSB is the only one supported)
and if LSB was set (which was the default) the ioct to set clock phase would fail. This
deprecates all the individual functions, the LSB/MSB functions, and adds an SPI mode selection
function. This is usually more understandable, and shows up in a lot more documentation
This causes setVoltage to be called on the lower level motor contollers,
which is benefical in cases when they are smart motor controllers.
Previously, the default implementation (using the bus voltage and
calling set()) was used in this case.
This does slightly pessimize the case when the lower level motor
controllers use the default setVoltage implementation, but given the
prevalence of smart motor controllers, this seems like an overall win.
The FPGA API takes microseconds directly, instead of a scaled value. Also add a new HAL level API to trigger multiple DIOs with the same pulse at once.
Now, implicit narrowing conversions are only used with wpi::Now(). This
also fixes clang-tidy warnings about C-style casts. For example:
```
== clang-tidy /__w/allwpilib/allwpilib/wpilibNewCommands/src/main/native/include/frc2/command/SwerveControllerCommand.inc ==
/__w/allwpilib/allwpilib/wpilibNewCommands/src/main/native/include/frc2/command/SwerveControllerCommand.inc:95:18: warning: C-style casts are discouraged; use static_cast/const_cast/reinterpret_cast [google-readability-casting]
auto curTime = units::second_t(m_timer.Get());
^
```
In that case at least, the cast was removed entirely since Get() already
returns a units::second_t.
fmt removed fmt::make_args_checked since it's no longer needed for
constexpr format string checks.
fmt deprecated implicit conversions from enums to integers in format
arguments, so I added explicit static casts.
