For example, it's no longer possible to compile a program that uses position
control without specifying a position reference, or one that uses an encoder
as a position reference without specifying a CPR. This eliminates a lot of
common CANJaguar mistakes.
Change-Id: I2b5fe1e2884cf3a0f9d5ccd233da4c2c9c1cff4c
Change-Id: If6082f6b92b4be5e328278ba536d5a7681082c9f (+4 squashed commit)
Squashed commit:
[86b4ae7] * Port I2C to roboRIO in JNI and Java. Left read method as a transaction and added readOnly. Left write as a single byte and added writeBulk. Need to go back to C++ and update to match.
Change-Id: I290d84211a4b7bb942d785730c0e6929449cf69f
[7d37419] * Remove HiTechnic sensors from Java. May be added back later as examples
Change-Id: Ie93e23a70fd953c99c03d50d9529220f86d32e03
[e62bfbf] * I2C ported to roboRIO i2clib in HAL and C++
Change-Id: Idb0e8cee5a1e8c1a0b0733ca94b528f659352915
[1059a48] * Remove HiTechnic sensors (Lego connector) may be added back as examples later
Change-Id: I84b8e1e022db2c69d487ed9ad5b3ec0e7ea57282 (+2 squashed commit)
Squashed commit:
[e62bfbf] * I2C ported to roboRIO i2clib in HAL and C++
Change-Id: Idb0e8cee5a1e8c1a0b0733ca94b528f659352915
[1059a48] * Remove HiTechnic sensors (Lego connector) may be added back as examples later
Change-Id: I84b8e1e022db2c69d487ed9ad5b3ec0e7ea57282
All configuration messages are now verified.
All status messages are requested as periodic messages and retrieved on-demand.
All relevant configuration data is re-sent after a power cycle.
Change-Id: I3322d8b41d6fe058ad404b781f54e9c6153981bf
Added a PCM java test and a Counter C++ test
Add RelayTest for C++, fixed spelling error in Relay.cpp
Change-Id: I436ac34449d00e8dcd1b988758cc24e80534a2c7
AnalogModule and DigitalModule classes still exist, at least until they are
refactored into the classes that use them.
Change-Id: I5544d5418822f19d54ba0a5d651e64fad8b7b10d
Adds Logger output to tests when they fail to allow the rest of the tests to run while you can follow the failure stack trace. This allows you to begin working on fixing the failure before the remainder of the tests have run.
Change-Id: I84adfad0b31b166f027d0bf9797a23856dd02f97
Fixes to deal with the switch to .hpp files in the HAL and other misc problems due to rebasing.
Added Omar's changes to the compressor interface
Fixes to make C++ plugin compile on linux.
Added import of the WPILibSim code from the graduate class. It shows up as wpilibJavaSim to follow the convention set by wpilibJava, wpilibJavaJNI and wpilibJavaFinal.
Fixed wpilibJavaSim artifactId to mirror the new convention.
Modified the build of the java plugin to pull in the simulation dependencies.
Added stacktrace printing.
Fixed support for creating projects.
Added support for the isReal() and isSimulation() methods along with the AnalogPotentiometer object to support simulating GearsBot.
Added support for a "WPILib Simulate" button.
Added GearsBot to the built in examples.
Added support for specifying the world file during project creation and switched the default from BluntObjectBot to GearsBot.
Removed unused import.
Added file browser for world files.
Added support for debugging in simulation.
Change simulate icon to be a Gazebo icon.
Switched over to the gazebo messaging system.
Updated location of default world file.
Reverted cmake change.
Fixed bug in WPILibJSim, added better logging and cleaned up code.
Made the frc_gazebo_plugin build using raw cmake instead of catkin, breaking the final ROS dependencies.
Added installation to frc_gazebo_plugin Makefile.
Fixed running of simulation to actually use frcsim.
Initial commit of simulation library for C++. Has the minimal subset of features necessary for having a Simple Robot run in teleoperated mode.
Added notes for generating protobuf messages.
Import of the debuild process into the main repository.
Moved frc_gazebo_plugin under simulation and removed the gazebo folder.
Updated the gazebo plugin to remove excessive printing and limit motor signal to [-1,1].
Updated WPILibJSim to support latching messages and to sleep for 20ms in iterative robot.
Reduced delay between starting frcsim and the users program to 1 second.
Updated GearsBot example.
Fixed a few minor issues for demoable state.
Added simulator support for Victors, Jaguars and Talons.
Added NetworkTables, SmartDashboard and LiveWindow to the simulator.
Added AnalogPotentiometer for simulation.
Added support for simulating encoders.
Added simulation support for Gyro.
Added IterativeRobot, Fixed Timers, Notifiers, PIDControllers and other minor fixes + cleanup.
Added RobotDrive support to simulation.
Separated out JavaGazebo so that SimDS will be able to reuse it.
Separated out SimDS into its own application..
Fixes so that the SimDS is distributed and runs properly for Java with the eclipse plugins.
Added DriverStation support to WPILibCSim
Cleanup of DriverStation, WaitUntilCommand and AnalogPotentiometer for WPILibCSim.
Cleanup of includes for WPILibCSim
Added AnalogPotentiometer to the real WPILibC.
Added AnalogPotentiometer to the real WPILibC.
Added GearsBot example to C++ eclipse plugin.
WPILibCSim fixes to work with launching from the plugin.
Package libwpilibsim in a deb file.
Added includes to plugin distribution.
Added support for external-limit-switches to Gazebo, Java and C++.
Added support for Gazebo Rangefinders and Analog channels to read their values in C++ and Java.
Added support for internal limit switches.
Updated GearsBot programs to use limit switches + range finders.
Added disabling of motors when robot is disabled to more closely mimic the real robot.
Fixes to deal with the switch to .hpp files in the HAL and other misc problems due to rebasing.
Change-Id: I624c5f4d0f28282616a7c92083575bf68adcdce2
Made a toplevel directory for C++ and C++ tests
Change-Id: I4bc2074a7036ec7fe79568b411637a5bee9eb5b3
Added the C++ testing framework and one test
Change-Id: I1e80a1e16b251a49666820a9d4c8caa025da9785
This is the changes made by Patrick Plenefisch converting the native
code to use CMake and the CMake Maven Plugin, as opposed to the
native Maven plugin. This is to allow for compatibility with newer
versions of the GCC toolchain. All the cpp sources were moved from
maven style directories to cpp style directories for CMake.
Change-Id: I67f5e3608948f37c83b0990d232105a3784f8593
Updated the HAL library to work with the new version 3 headers
from NI. There were multiple changes in this verison: more PWM
generators were added, so the functions for setting PWM signals have
been updated. UserWatchdog has been removed, and Watchdog has been
removed from WPILib to accomodate for this. Digital selection has been
consolidated to one function in the NI headers, so this has been updated
in the HAL. New SPI and I2C libraries have been added, but need to
be implemented in the HAL before they will work.
