allwpilib/hal/lib/athena/SPI.cpp

/*----------------------------------------------------------------------------*/
/* Copyright (c) FIRST 2016-2017. All Rights Reserved.                        */
/* Open Source Software - may be modified and shared by FRC teams. The code   */
/* must be accompanied by the FIRST BSD license file in the root directory of */
/* the project.                                                               */
/*----------------------------------------------------------------------------*/

#include "HAL/SPI.h"

#include <atomic>

#include "DigitalInternal.h"
#include "HAL/DIO.h"
#include "HAL/HAL.h"
#include "HAL/Notifier.h"
#include "HAL/cpp/make_unique.h"
#include "HAL/cpp/priority_mutex.h"
#include "HAL/handles/HandlesInternal.h"
#include "llvm/raw_ostream.h"
#include "spilib/spi-lib.h"

using namespace hal;

static int32_t m_spiCS0Handle = 0;
static int32_t m_spiCS1Handle = 0;
static int32_t m_spiCS2Handle = 0;
static int32_t m_spiCS3Handle = 0;
static int32_t m_spiMXPHandle = 0;
static priority_recursive_mutex spiOnboardMutex;
static priority_recursive_mutex spiMXPMutex;

// MXP SPI does not count towards this
std::atomic<int32_t> spiPortCount{0};

static HAL_DigitalHandle digitalHandles[9]{HAL_kInvalidHandle};

/**
 * Get the semaphore for a SPI port
 *
 * @param port The number of the port to use. 0-3 for Onboard CS0-CS2, 4 for MXP
 * @return The semaphore for the SPI port.
 */
static priority_recursive_mutex& spiGetMutex(HAL_SPIPort port) {
  if (port < 4)
    return spiOnboardMutex;
  else
    return spiMXPMutex;
}

extern "C" {

struct SPIAccumulator {
  std::atomic<HAL_NotifierHandle> notifier{0};
  uint64_t triggerTime;
  int32_t period;

  int64_t value = 0;
  uint32_t count = 0;
  int32_t lastValue = 0;

  int32_t center = 0;
  int32_t deadband = 0;

  uint8_t cmd[4];  // command to send (up to 4 bytes)
  int32_t validMask;
  int32_t validValue;
  int32_t dataMax;      // one more than max data value
  int32_t dataMsbMask;  // data field MSB mask (for signed)
  uint8_t dataShift;    // data field shift right amount, in bits
  uint8_t xferSize;     // SPI transfer size, in bytes (up to 4)
  HAL_SPIPort port;
  bool isSigned;   // is data field signed?
  bool bigEndian;  // is response big endian?
};
std::unique_ptr<SPIAccumulator> spiAccumulators[5];

static void CommonSPIPortInit(int32_t* status) {
  // All false cases will set
  if (spiPortCount.fetch_add(1) == 0) {
    // Have not been initialized yet
    initializeDigital(status);
    if (*status != 0) return;
    // MISO
    if ((digitalHandles[3] = HAL_InitializeDIOPort(createPortHandleForSPI(29),
                                                   false, status)) ==
        HAL_kInvalidHandle) {
      std::printf("Failed to allocate DIO 29 (MISO)\n");
      return;
    }
    // MOSI
    if ((digitalHandles[4] = HAL_InitializeDIOPort(createPortHandleForSPI(30),
                                                   false, status)) ==
        HAL_kInvalidHandle) {
      std::printf("Failed to allocate DIO 30 (MOSI)\n");
      HAL_FreeDIOPort(digitalHandles[3]);  // free the first port allocated
      return;
    }
  }
}

static void CommonSPIPortFree() {
  if (spiPortCount.fetch_sub(1) == 1) {
    // Clean up SPI Handles
    HAL_FreeDIOPort(digitalHandles[3]);
    HAL_FreeDIOPort(digitalHandles[4]);
  }
}

/*
 * Initialize the spi port. Opens the port if necessary and saves the handle.
 * If opening the MXP port, also sets up the channel functions appropriately
 * @param port The number of the port to use. 0-3 for Onboard CS0-CS3, 4 for MXP
 */
void HAL_InitializeSPI(HAL_SPIPort port, int32_t* status) {
  if (HAL_GetSPIHandle(port) != 0) return;
  switch (port) {
    case 0:
      CommonSPIPortInit(status);
      if (*status != 0) return;
      // CS0 is not a DIO port, so nothing to allocate
      HAL_SetSPIHandle(HAL_SPI_kOnboardCS0, spilib_open("/dev/spidev0.0"));
      break;
    case 1:
      CommonSPIPortInit(status);
      if (*status != 0) return;
      // CS1, Allocate
      if ((digitalHandles[0] = HAL_InitializeDIOPort(createPortHandleForSPI(26),
                                                     false, status)) ==
          HAL_kInvalidHandle) {
        std::printf("Failed to allocate DIO 26 (CS1)\n");
        CommonSPIPortFree();
        return;
      }
      HAL_SetSPIHandle(HAL_SPI_kOnboardCS1, spilib_open("/dev/spidev0.1"));
      break;
    case 2:
      CommonSPIPortInit(status);
      if (*status != 0) return;
      // CS2, Allocate
      if ((digitalHandles[1] = HAL_InitializeDIOPort(createPortHandleForSPI(27),
                                                     false, status)) ==
          HAL_kInvalidHandle) {
        std::printf("Failed to allocate DIO 27 (CS2)\n");
        CommonSPIPortFree();
        return;
      }
      HAL_SetSPIHandle(HAL_SPI_kOnboardCS2, spilib_open("/dev/spidev0.2"));
      break;
    case 3:
      CommonSPIPortInit(status);
      if (*status != 0) return;
      // CS3, Allocate
      if ((digitalHandles[2] = HAL_InitializeDIOPort(createPortHandleForSPI(28),
                                                     false, status)) ==
          HAL_kInvalidHandle) {
        std::printf("Failed to allocate DIO 28 (CS3)\n");
        CommonSPIPortFree();
        return;
      }
      HAL_SetSPIHandle(HAL_SPI_kOnboardCS3, spilib_open("/dev/spidev0.3"));
      break;
    case 4:
      initializeDigital(status);
      if (*status != 0) return;
      if ((digitalHandles[5] = HAL_InitializeDIOPort(createPortHandleForSPI(14),
                                                     false, status)) ==
          HAL_kInvalidHandle) {
        llvm::outs() << "Failed to allocate DIO 14\n";
        return;
      }
      if ((digitalHandles[6] = HAL_InitializeDIOPort(createPortHandleForSPI(15),
                                                     false, status)) ==
          HAL_kInvalidHandle) {
        llvm::outs() << "Failed to allocate DIO 15\n";
        HAL_FreeDIOPort(digitalHandles[5]);  // free the first port allocated
        return;
      }
      if ((digitalHandles[7] = HAL_InitializeDIOPort(createPortHandleForSPI(16),
                                                     false, status)) ==
          HAL_kInvalidHandle) {
        llvm::outs() << "Failed to allocate DIO 16\n";
        HAL_FreeDIOPort(digitalHandles[5]);  // free the first port allocated
        HAL_FreeDIOPort(digitalHandles[6]);  // free the second port allocated
        return;
      }
      if ((digitalHandles[8] = HAL_InitializeDIOPort(createPortHandleForSPI(17),
                                                     false, status)) ==
          HAL_kInvalidHandle) {
        llvm::outs() << "Failed to allocate DIO 17\n";
        HAL_FreeDIOPort(digitalHandles[5]);  // free the first port allocated
        HAL_FreeDIOPort(digitalHandles[6]);  // free the second port allocated
        HAL_FreeDIOPort(digitalHandles[7]);  // free the third port allocated
        return;
      }
      digitalSystem->writeEnableMXPSpecialFunction(
          digitalSystem->readEnableMXPSpecialFunction(status) | 0x00F0, status);
      HAL_SetSPIHandle(HAL_SPI_kMXP, spilib_open("/dev/spidev1.0"));
      break;
    default:
      *status = PARAMETER_OUT_OF_RANGE;
      break;
  }
  return;
}

/**
 * Generic transaction.
 *
 * This is a lower-level interface to the spi hardware giving you more control
 * over each transaction.
 *
 * @param port The number of the port to use. 0-3 for Onboard CS0-CS2, 4 for MXP
 * @param dataToSend Buffer of data to send as part of the transaction.
 * @param dataReceived Buffer to read data into.
 * @param size Number of bytes to transfer. [0..7]
 * @return Number of bytes transferred, -1 for error
 */
int32_t HAL_TransactionSPI(HAL_SPIPort port, uint8_t* dataToSend,
                           uint8_t* dataReceived, int32_t size) {
  std::lock_guard<priority_recursive_mutex> sync(spiGetMutex(port));
  return spilib_writeread(
      HAL_GetSPIHandle(port), reinterpret_cast<const char*>(dataToSend),
      reinterpret_cast<char*>(dataReceived), static_cast<int32_t>(size));
}

/**
 * Execute a write transaction with the device.
 *
 * Write to a device and wait until the transaction is complete.
 *
 * @param port The number of the port to use. 0-3 for Onboard CS0-CS2, 4 for MXP
 * @param datToSend The data to write to the register on the device.
 * @param sendSize The number of bytes to be written
 * @return The number of bytes written. -1 for an error
 */
int32_t HAL_WriteSPI(HAL_SPIPort port, uint8_t* dataToSend, int32_t sendSize) {
  std::lock_guard<priority_recursive_mutex> sync(spiGetMutex(port));
  return spilib_write(HAL_GetSPIHandle(port),
                      reinterpret_cast<const char*>(dataToSend),
                      static_cast<int32_t>(sendSize));
}

/**
 * Execute a read from the device.
 *
 *   This method does not write any data out to the device
 *   Most spi devices will require a register address to be written before
 *   they begin returning data
 *
 * @param port The number of the port to use. 0-3 for Onboard CS0-CS2, 4 for MXP
 * @param buffer A pointer to the array of bytes to store the data read from the
 * device.
 * @param count The number of bytes to read in the transaction. [1..7]
 * @return Number of bytes read. -1 for error.
 */
int32_t HAL_ReadSPI(HAL_SPIPort port, uint8_t* buffer, int32_t count) {
  std::lock_guard<priority_recursive_mutex> sync(spiGetMutex(port));
  return spilib_read(HAL_GetSPIHandle(port), reinterpret_cast<char*>(buffer),
                     static_cast<int32_t>(count));
}

/**
 * Close the SPI port
 *
 * @param port The number of the port to use. 0-3 for Onboard CS0-CS2, 4 for MXP
 */
void HAL_CloseSPI(HAL_SPIPort port) {
  std::lock_guard<priority_recursive_mutex> sync(spiGetMutex(port));
  if (spiAccumulators[port]) {
    int32_t status = 0;
    HAL_FreeSPIAccumulator(port, &status);
  }
  spilib_close(HAL_GetSPIHandle(port));
  HAL_SetSPIHandle(port, 0);
  if (port < 4) {
    CommonSPIPortFree();
  }
  switch (port) {
    // Case 0 does not need to do anything
    case 1:
      HAL_FreeDIOPort(digitalHandles[0]);
      break;
    case 2:
      HAL_FreeDIOPort(digitalHandles[1]);
      break;
    case 3:
      HAL_FreeDIOPort(digitalHandles[2]);
      break;
    case 4:
      HAL_FreeDIOPort(digitalHandles[5]);
      HAL_FreeDIOPort(digitalHandles[6]);
      HAL_FreeDIOPort(digitalHandles[7]);
      HAL_FreeDIOPort(digitalHandles[8]);
      break;
    default:
      break;
  }
  return;
}

/**
 * Set the clock speed for the SPI bus.
 *
 * @param port The number of the port to use. 0-3 for Onboard CS0-CS2, 4 for MXP
 * @param speed The speed in Hz (0-1MHz)
 */
void HAL_SetSPISpeed(HAL_SPIPort port, int32_t speed) {
  std::lock_guard<priority_recursive_mutex> sync(spiGetMutex(port));
  spilib_setspeed(HAL_GetSPIHandle(port), speed);
}

/**
 * Set the SPI options
 *
 * @param port The number of the port to use. 0-3 for Onboard CS0-CS2, 4 for MXP
 * @param msbFirst True to write the MSB first, False for LSB first
 * @param sampleOnTrailing True to sample on the trailing edge, False to sample
 * on the leading edge
 * @param clkIdleHigh True to set the clock to active low, False to set the
 * clock active high
 */
void HAL_SetSPIOpts(HAL_SPIPort port, HAL_Bool msbFirst,
                    HAL_Bool sampleOnTrailing, HAL_Bool clkIdleHigh) {
  std::lock_guard<priority_recursive_mutex> sync(spiGetMutex(port));
  spilib_setopts(HAL_GetSPIHandle(port), msbFirst, sampleOnTrailing,
                 clkIdleHigh);
}

/**
 * Set the CS Active high for a SPI port
 *
 * @param port The number of the port to use. 0-3 for Onboard CS0-CS2, 4 for MXP
 */
void HAL_SetSPIChipSelectActiveHigh(HAL_SPIPort port, int32_t* status) {
  std::lock_guard<priority_recursive_mutex> sync(spiGetMutex(port));
  if (port < 4) {
    spiSystem->writeChipSelectActiveHigh_Hdr(
        spiSystem->readChipSelectActiveHigh_Hdr(status) | (1 << port), status);
  } else {
    spiSystem->writeChipSelectActiveHigh_MXP(1, status);
  }
}

/**
 * Set the CS Active low for a SPI port
 *
 * @param port The number of the port to use. 0-3 for Onboard CS0-CS2, 4 for MXP
 */
void HAL_SetSPIChipSelectActiveLow(HAL_SPIPort port, int32_t* status) {
  std::lock_guard<priority_recursive_mutex> sync(spiGetMutex(port));
  if (port < 4) {
    spiSystem->writeChipSelectActiveHigh_Hdr(
        spiSystem->readChipSelectActiveHigh_Hdr(status) & ~(1 << port), status);
  } else {
    spiSystem->writeChipSelectActiveHigh_MXP(0, status);
  }
}

/**
 * Get the stored handle for a SPI port
 *
 * @param port The number of the port to use. 0-3 for Onboard CS0-CS2, 4 for MXP
 * @return The stored handle for the SPI port. 0 represents no stored handle.
 */
int32_t HAL_GetSPIHandle(HAL_SPIPort port) {
  std::lock_guard<priority_recursive_mutex> sync(spiGetMutex(port));
  switch (port) {
    case 0:
      return m_spiCS0Handle;
    case 1:
      return m_spiCS1Handle;
    case 2:
      return m_spiCS2Handle;
    case 3:
      return m_spiCS3Handle;
    case 4:
      return m_spiMXPHandle;
    default:
      return 0;
  }
}

/**
 * Set the stored handle for a SPI port
 *
 * @param port The number of the port to use. 0-3 for Onboard CS0-CS2, 4 for
 * MXP.
 * @param handle The value of the handle for the port.
 */
void HAL_SetSPIHandle(HAL_SPIPort port, int32_t handle) {
  std::lock_guard<priority_recursive_mutex> sync(spiGetMutex(port));
  switch (port) {
    case 0:
      m_spiCS0Handle = handle;
      break;
    case 1:
      m_spiCS1Handle = handle;
      break;
    case 2:
      m_spiCS2Handle = handle;
      break;
    case 3:
      m_spiCS3Handle = handle;
      break;
    case 4:
      m_spiMXPHandle = handle;
      break;
    default:
      break;
  }
}

static void spiAccumulatorProcess(uint64_t currentTime,
                                  HAL_NotifierHandle handle) {
  int32_t status = 0;
  auto param = HAL_GetNotifierParam(handle, &status);
  if (param == nullptr) return;
  SPIAccumulator* accum = static_cast<SPIAccumulator*>(param);

  // perform SPI transaction
  uint8_t resp_b[4];
  std::lock_guard<priority_recursive_mutex> sync(spiGetMutex(accum->port));
  spilib_writeread(
      HAL_GetSPIHandle(accum->port), reinterpret_cast<const char*>(accum->cmd),
      reinterpret_cast<char*>(resp_b), static_cast<int32_t>(accum->xferSize));

  // convert from bytes
  uint32_t resp = 0;
  if (accum->bigEndian) {
    for (int32_t i = 0; i < accum->xferSize; ++i) {
      resp <<= 8;
      resp |= resp_b[i] & 0xff;
    }
  } else {
    for (int32_t i = accum->xferSize - 1; i >= 0; --i) {
      resp <<= 8;
      resp |= resp_b[i] & 0xff;
    }
  }

  // process response
  if ((resp & accum->validMask) == static_cast<uint32_t>(accum->validValue)) {
    // valid sensor data; extract data field
    int32_t data = static_cast<int32_t>(resp >> accum->dataShift);
    data &= accum->dataMax - 1;
    // 2s complement conversion if signed MSB is set
    if (accum->isSigned && (data & accum->dataMsbMask) != 0)
      data -= accum->dataMax;
    // center offset
    data -= accum->center;
    // only accumulate if outside deadband
    if (data < -accum->deadband || data > accum->deadband) accum->value += data;
    ++accum->count;
    accum->lastValue = data;
  } else {
    // no data from the sensor; just clear the last value
    accum->lastValue = 0;
  }

  // reschedule timer
  accum->triggerTime += accum->period;
  // handle timer slip
  if (accum->triggerTime < currentTime)
    accum->triggerTime = currentTime + accum->period;
  status = 0;
  HAL_UpdateNotifierAlarm(accum->notifier, accum->triggerTime, &status);
}

/**
 * Initialize a SPI accumulator.
 *
 * @param port SPI port
 * @param period Time between reads, in us
 * @param cmd SPI command to send to request data
 * @param xferSize SPI transfer size, in bytes
 * @param validMask Mask to apply to received data for validity checking
 * @param valid_data After validMask is applied, required matching value for
 *                   validity checking
 * @param dataShift Bit shift to apply to received data to get actual data
 *                   value
 * @param dataSize Size (in bits) of data field
 * @param isSigned Is data field signed?
 * @param bigEndian Is device big endian?
 */
void HAL_InitSPIAccumulator(HAL_SPIPort port, int32_t period, int32_t cmd,
                            int32_t xferSize, int32_t validMask,
                            int32_t validValue, int32_t dataShift,
                            int32_t dataSize, HAL_Bool isSigned,
                            HAL_Bool bigEndian, int32_t* status) {
  std::lock_guard<priority_recursive_mutex> sync(spiGetMutex(port));
  if (port > 4) return;
  if (!spiAccumulators[port])
    spiAccumulators[port] = std::make_unique<SPIAccumulator>();
  SPIAccumulator* accum = spiAccumulators[port].get();
  if (bigEndian) {
    for (int32_t i = xferSize - 1; i >= 0; --i) {
      accum->cmd[i] = cmd & 0xff;
      cmd >>= 8;
    }
  } else {
    accum->cmd[0] = cmd & 0xff;
    cmd >>= 8;
    accum->cmd[1] = cmd & 0xff;
    cmd >>= 8;
    accum->cmd[2] = cmd & 0xff;
    cmd >>= 8;
    accum->cmd[3] = cmd & 0xff;
  }
  accum->period = period;
  accum->xferSize = xferSize;
  accum->validMask = validMask;
  accum->validValue = validValue;
  accum->dataShift = dataShift;
  accum->dataMax = (1 << dataSize);
  accum->dataMsbMask = (1 << (dataSize - 1));
  accum->isSigned = isSigned;
  accum->bigEndian = bigEndian;
  accum->port = port;
  if (!accum->notifier) {
    accum->notifier =
        HAL_InitializeNotifier(spiAccumulatorProcess, accum, status);
    accum->triggerTime = HAL_GetFPGATime(status) + period;
    if (*status != 0) return;
    HAL_UpdateNotifierAlarm(accum->notifier, accum->triggerTime, status);
  }
}

/**
 * Frees a SPI accumulator.
 */
void HAL_FreeSPIAccumulator(HAL_SPIPort port, int32_t* status) {
  std::lock_guard<priority_recursive_mutex> sync(spiGetMutex(port));
  SPIAccumulator* accum = spiAccumulators[port].get();
  if (!accum) {
    *status = NULL_PARAMETER;
    return;
  }
  HAL_NotifierHandle handle = accum->notifier.exchange(0);
  HAL_CleanNotifier(handle, status);
  spiAccumulators[port] = nullptr;
}

/**
 * Resets the accumulator to zero.
 */
void HAL_ResetSPIAccumulator(HAL_SPIPort port, int32_t* status) {
  std::lock_guard<priority_recursive_mutex> sync(spiGetMutex(port));
  SPIAccumulator* accum = spiAccumulators[port].get();
  if (!accum) {
    *status = NULL_PARAMETER;
    return;
  }
  accum->value = 0;
  accum->count = 0;
  accum->lastValue = 0;
}

/**
 * Set the center value of the accumulator.
 *
 * The center value is subtracted from each value before it is added to the
 * accumulator. This
 * is used for the center value of devices like gyros and accelerometers to make
 * integration work
 * and to take the device offset into account when integrating.
 */
void HAL_SetSPIAccumulatorCenter(HAL_SPIPort port, int32_t center,
                                 int32_t* status) {
  std::lock_guard<priority_recursive_mutex> sync(spiGetMutex(port));
  SPIAccumulator* accum = spiAccumulators[port].get();
  if (!accum) {
    *status = NULL_PARAMETER;
    return;
  }
  accum->center = center;
}

/**
 * Set the accumulator's deadband.
 */
void HAL_SetSPIAccumulatorDeadband(HAL_SPIPort port, int32_t deadband,
                                   int32_t* status) {
  std::lock_guard<priority_recursive_mutex> sync(spiGetMutex(port));
  SPIAccumulator* accum = spiAccumulators[port].get();
  if (!accum) {
    *status = NULL_PARAMETER;
    return;
  }
  accum->deadband = deadband;
}

/**
 * Read the last value read by the accumulator engine.
 */
int32_t HAL_GetSPIAccumulatorLastValue(HAL_SPIPort port, int32_t* status) {
  std::lock_guard<priority_recursive_mutex> sync(spiGetMutex(port));
  SPIAccumulator* accum = spiAccumulators[port].get();
  if (!accum) {
    *status = NULL_PARAMETER;
    return 0;
  }
  return accum->lastValue;
}

/**
 * Read the accumulated value.
 *
 * @return The 64-bit value accumulated since the last Reset().
 */
int64_t HAL_GetSPIAccumulatorValue(HAL_SPIPort port, int32_t* status) {
  std::lock_guard<priority_recursive_mutex> sync(spiGetMutex(port));
  SPIAccumulator* accum = spiAccumulators[port].get();
  if (!accum) {
    *status = NULL_PARAMETER;
    return 0;
  }
  return accum->value;
}

/**
 * Read the number of accumulated values.
 *
 * Read the count of the accumulated values since the accumulator was last
 * Reset().
 *
 * @return The number of times samples from the channel were accumulated.
 */
int64_t HAL_GetSPIAccumulatorCount(HAL_SPIPort port, int32_t* status) {
  std::lock_guard<priority_recursive_mutex> sync(spiGetMutex(port));
  SPIAccumulator* accum = spiAccumulators[port].get();
  if (!accum) {
    *status = NULL_PARAMETER;
    return 0;
  }
  return accum->count;
}

/**
 * Read the average of the accumulated value.
 *
 * @return The accumulated average value (value / count).
 */
double HAL_GetSPIAccumulatorAverage(HAL_SPIPort port, int32_t* status) {
  int64_t value;
  int64_t count;
  HAL_GetSPIAccumulatorOutput(port, &value, &count, status);
  if (count == 0) return 0.0;
  return static_cast<double>(value) / count;
}

/**
 * Read the accumulated value and the number of accumulated values atomically.
 *
 * This function reads the value and count atomically.
 * This can be used for averaging.
 *
 * @param value Pointer to the 64-bit accumulated output.
 * @param count Pointer to the number of accumulation cycles.
 */
void HAL_GetSPIAccumulatorOutput(HAL_SPIPort port, int64_t* value,
                                 int64_t* count, int32_t* status) {
  std::lock_guard<priority_recursive_mutex> sync(spiGetMutex(port));
  SPIAccumulator* accum = spiAccumulators[port].get();
  if (!accum) {
    *status = NULL_PARAMETER;
    *value = 0;
    *count = 0;
    return;
  }
  *value = accum->value;
  *count = accum->count;
}
}