allwpilib/wpilibc/src/main/native/include/I2C.h

/*----------------------------------------------------------------------------*/
/* Copyright (c) 2008-2018 FIRST. All Rights Reserved.                        */
/* Open Source Software - may be modified and shared by FRC teams. The code   */
/* must be accompanied by the FIRST BSD license file in the root directory of */
/* the project.                                                               */
/*----------------------------------------------------------------------------*/

#pragma once

#include <stdint.h>

#include "ErrorBase.h"

enum HAL_I2CPort : int32_t;

namespace frc {

/**
 * I2C bus interface class.
 *
 * This class is intended to be used by sensor (and other I2C device) drivers.
 * It probably should not be used directly.
 */
class I2C : public ErrorBase {
 public:
  enum Port { kOnboard = 0, kMXP };

  /**
   * Constructor.
   *
   * @param port          The I2C port to which the device is connected.
   * @param deviceAddress The address of the device on the I2C bus.
   */
  I2C(Port port, int deviceAddress);

  ~I2C() override;

  I2C(const I2C&) = delete;
  I2C& operator=(const I2C&) = delete;

  /**
   * Generic transaction.
   *
   * This is a lower-level interface to the I2C hardware giving you more control
   * over each transaction.
   *
   * @param dataToSend   Buffer of data to send as part of the transaction.
   * @param sendSize     Number of bytes to send as part of the transaction.
   * @param dataReceived Buffer to read data into.
   * @param receiveSize  Number of bytes to read from the device.
   * @return Transfer Aborted... false for success, true for aborted.
   */
  bool Transaction(uint8_t* dataToSend, int sendSize, uint8_t* dataReceived,
                   int receiveSize);

  /**
   * Attempt to address a device on the I2C bus.
   *
   * This allows you to figure out if there is a device on the I2C bus that
   * responds to the address specified in the constructor.
   *
   * @return Transfer Aborted... false for success, true for aborted.
   */
  bool AddressOnly();

  /**
   * Execute a write transaction with the device.
   *
   * Write a single byte to a register on a device and wait until the
   *   transaction is complete.
   *
   * @param registerAddress The address of the register on the device to be
   *                        written.
   * @param data            The byte to write to the register on the device.
   * @return Transfer Aborted... false for success, true for aborted.
   */
  bool Write(int registerAddress, uint8_t data);

  /**
   * Execute a bulk write transaction with the device.
   *
   * Write multiple bytes to a device and wait until the
   *   transaction is complete.
   *
   * @param data  The data to write to the register on the device.
   * @param count The number of bytes to be written.
   * @return Transfer Aborted... false for success, true for aborted.
   */
  bool WriteBulk(uint8_t* data, int count);

  /**
   * Execute a read transaction with the device.
   *
   * Read bytes from a device.
   * Most I2C devices will auto-increment the register pointer internally
   * allowing you to read consecutive registers on a device in a single
   * transaction.
   *
   * @param registerAddress The register to read first in the transaction.
   * @param count           The number of bytes to read in the transaction.
   * @param buffer          A pointer to the array of bytes to store the data
   *                        read from the device.
   * @return Transfer Aborted... false for success, true for aborted.
   */
  bool Read(int registerAddress, int count, uint8_t* data);

  /**
   * Execute a read only transaction with the device.
   *
   * Read bytes from a device. This method does not write any data to prompt the
   * device.
   *
   * @param buffer A pointer to the array of bytes to store the data read from
   *               the device.
   * @param count  The number of bytes to read in the transaction.
   * @return Transfer Aborted... false for success, true for aborted.
   */
  bool ReadOnly(int count, uint8_t* buffer);

  /**
   * Verify that a device's registers contain expected values.
   *
   * Most devices will have a set of registers that contain a known value that
   * can be used to identify them.  This allows an I2C device driver to easily
   * verify that the device contains the expected value.
   *
   * @pre The device must support and be configured to use register
   * auto-increment.
   *
   * @param registerAddress The base register to start reading from the device.
   * @param count           The size of the field to be verified.
   * @param expected        A buffer containing the values expected from the
   *                        device.
   */
  bool VerifySensor(int registerAddress, int count, const uint8_t* expected);

 private:
  HAL_I2CPort m_port;
  int m_deviceAddress;
};

}  // namespace frc