mirror of
https://github.com/wpilibsuite/allwpilib
synced 2026-06-19 00:41:43 +00:00
86 lines
3.0 KiB
C++
86 lines
3.0 KiB
C++
/*----------------------------------------------------------------------------*/
|
|
/* Copyright (c) FIRST 2016. All Rights Reserved. */
|
|
/* Open Source Software - may be modified and shared by FRC teams. The code */
|
|
/* must be accompanied by the FIRST BSD license file in the root directory of */
|
|
/* the project. */
|
|
/*----------------------------------------------------------------------------*/
|
|
|
|
#pragma once
|
|
|
|
#include <stdint.h>
|
|
|
|
#include "ChipObject.h"
|
|
#include "HAL/AnalogTrigger.h"
|
|
#include "HAL/Handles.h"
|
|
#include "HAL/Ports.h"
|
|
#include "PortsInternal.h"
|
|
#include "handles/DigitalHandleResource.h"
|
|
#include "handles/HandlesInternal.h"
|
|
|
|
namespace hal {
|
|
constexpr uint32_t kMXPDigitalPWMOffset = 6; // MXP pins when used as digital
|
|
// output pwm are offset by 6 from
|
|
// actual value
|
|
constexpr uint32_t kExpectedLoopTiming = 40;
|
|
|
|
/**
|
|
* kDefaultPwmPeriod is in ms
|
|
*
|
|
* - 20ms periods (50 Hz) are the "safest" setting in that this works for all
|
|
* devices
|
|
* - 20ms periods seem to be desirable for Vex Motors
|
|
* - 20ms periods are the specified period for HS-322HD servos, but work
|
|
* reliably down to 10.0 ms; starting at about 8.5ms, the servo sometimes hums
|
|
* and get hot; by 5.0ms the hum is nearly continuous
|
|
* - 10ms periods work well for Victor 884
|
|
* - 5ms periods allows higher update rates for Luminary Micro Jaguar speed
|
|
* controllers. Due to the shipping firmware on the Jaguar, we can't run the
|
|
* update period less than 5.05 ms.
|
|
*
|
|
* kDefaultPwmPeriod is the 1x period (5.05 ms). In hardware, the period
|
|
* scaling is implemented as an output squelch to get longer periods for old
|
|
* devices.
|
|
*/
|
|
constexpr float kDefaultPwmPeriod = 5.05;
|
|
/**
|
|
* kDefaultPwmCenter is the PWM range center in ms
|
|
*/
|
|
constexpr float kDefaultPwmCenter = 1.5;
|
|
/**
|
|
* kDefaultPWMStepsDown is the number of PWM steps below the centerpoint
|
|
*/
|
|
constexpr int32_t kDefaultPwmStepsDown = 1000;
|
|
constexpr int32_t kPwmDisabled = 0;
|
|
|
|
// Create a mutex to protect changes to the DO PWM config
|
|
extern priority_recursive_mutex digitalPwmMutex;
|
|
|
|
extern tDIO* digitalSystem;
|
|
extern tRelay* relaySystem;
|
|
extern tPWM* pwmSystem;
|
|
|
|
extern bool digitalSystemsInitialized;
|
|
|
|
struct DigitalPort {
|
|
uint8_t pin;
|
|
bool configSet = false;
|
|
bool eliminateDeadband = false;
|
|
int32_t maxPwm = 0;
|
|
int32_t deadbandMaxPwm = 0;
|
|
int32_t centerPwm = 0;
|
|
int32_t deadbandMinPwm = 0;
|
|
int32_t minPwm = 0;
|
|
};
|
|
|
|
extern DigitalHandleResource<HAL_DigitalHandle, DigitalPort,
|
|
kNumDigitalPins + kNumPWMHeaders>
|
|
digitalPinHandles;
|
|
|
|
void initializeDigital(int32_t* status);
|
|
bool remapDigitalSource(HAL_Handle digitalSourceHandle,
|
|
HAL_AnalogTriggerType analogTriggerType, uint32_t& pin,
|
|
uint8_t& module, bool& analogTrigger);
|
|
uint32_t remapMXPPWMChannel(uint32_t pin);
|
|
uint32_t remapMXPChannel(uint32_t pin);
|
|
}
|