allwpilib/wpilibcIntegrationTests/src/CANJaguarTest.cpp

/*----------------------------------------------------------------------------*/
/* Copyright (c) FIRST 2014-2016. All Rights Reserved.                        */
/* Open Source Software - may be modified and shared by FRC teams. The code   */
/* must be accompanied by the FIRST BSD license file in the root directory of */
/* the project.                                                               */
/*----------------------------------------------------------------------------*/

#include "CANJaguar.h"

#include "gtest/gtest.h"

#include "AnalogOutput.h"
#include "DigitalOutput.h"
#include "Relay.h"
#include "TestBench.h"
#include "Timer.h"
#include "WPIErrors.h"

static constexpr double kSpikeTime = 0.5;

static constexpr double kExpectedBusVoltage = 14.0;
static constexpr double kExpectedTemperature = 25.0;

static constexpr double kMotorTime = 0.5;

static constexpr double kEncoderSettlingTime = 1.0;
static constexpr double kEncoderPositionTolerance = 0.1;
static constexpr double kEncoderSpeedTolerance = 30.0;

static constexpr double kPotentiometerSettlingTime = 1.0;
static constexpr double kPotentiometerPositionTolerance = 0.1;

static constexpr double kCurrentTolerance = 0.1;

static constexpr double kVoltageTolerance = 0.1;

static constexpr double kMotorVoltage = 5.0;

static constexpr double kMotorPercent = 0.5;

static constexpr double kMotorSpeed = 100;
class CANJaguarTest : public testing::Test {
 protected:
  CANJaguar* m_jaguar;
  DigitalOutput *m_fakeForwardLimit, *m_fakeReverseLimit;
  AnalogOutput* m_fakePotentiometer;
  Relay* m_spike;

  virtual void SetUp() override {
    m_spike = new Relay(TestBench::kCANJaguarRelayChannel, Relay::kForwardOnly);
    m_spike->Set(Relay::kOn);
    Wait(kSpikeTime);

    m_jaguar = new CANJaguar(TestBench::kCANJaguarID);

    m_fakeForwardLimit = new DigitalOutput(TestBench::kFakeJaguarForwardLimit);
    m_fakeForwardLimit->Set(0);

    m_fakeReverseLimit = new DigitalOutput(TestBench::kFakeJaguarReverseLimit);
    m_fakeReverseLimit->Set(0);

    m_fakePotentiometer = new AnalogOutput(TestBench::kFakeJaguarPotentiometer);
    m_fakePotentiometer->SetVoltage(0.0f);

    /* The motor might still have momentum from the previous test. */
    Wait(kEncoderSettlingTime);
  }

  virtual void TearDown() override {
    delete m_jaguar;
    delete m_fakeForwardLimit;
    delete m_fakeReverseLimit;
    delete m_fakePotentiometer;
    delete m_spike;
  }

  /**
   * Calls CANJaguar::Set periodically 50 times to make sure everything is
   * verified.  This mimics a real robot program, where Set is presumably
   * called in each iteration of the main loop.
   */
  void SetJaguar(float totalTime, float value = 0.0f) {
    for (int i = 0; i < 50; i++) {
      m_jaguar->Set(value);
      Wait(totalTime / 50.0);
    }
  }
  /**
  * returns the sign of the given number
  */
  int SignNum(double value) { return -(value < 0) + (value > 0); }
  void InversionTest(float motorValue, float delayTime = kMotorTime) {
    m_jaguar->EnableControl();
    m_jaguar->SetInverted(false);
    SetJaguar(delayTime, motorValue);
    double initialSpeed = m_jaguar->GetSpeed();
    m_jaguar->Set(0.0);
    m_jaguar->SetInverted(true);
    SetJaguar(delayTime, motorValue);
    double finalSpeed = m_jaguar->GetSpeed();
    // checks that the motor has changed direction
    EXPECT_FALSE(SignNum(initialSpeed) == SignNum(finalSpeed))
        << "CAN Jaguar did not invert direction positive. Initial speed was: "
        << initialSpeed << " Final displacement was: " << finalSpeed
        << " Sign of initial displacement was: " << SignNum(initialSpeed)
        << " Sign of final displacement was: " << SignNum(finalSpeed);
    SetJaguar(delayTime, -motorValue);
    initialSpeed = m_jaguar->GetSpeed();
    m_jaguar->Set(0.0);
    m_jaguar->SetInverted(false);
    SetJaguar(delayTime, -motorValue);
    finalSpeed = m_jaguar->GetSpeed();
    EXPECT_FALSE(SignNum(initialSpeed) == SignNum(finalSpeed))
        << "CAN Jaguar did not invert direction negative. Initial displacement "
           "was: "
        << initialSpeed << " Final displacement was: " << finalSpeed
        << " Sign of initial displacement was: " << SignNum(initialSpeed)
        << " Sign of final displacement was: " << SignNum(finalSpeed);
  }
};

/**
 * Tests that allocating the same CANJaguar port as an already allocated port
 * causes a ResourceAlreadyAllocated error.
 */
TEST_F(CANJaguarTest, AlreadyAllocatedError) {
  std::cout << "The following errors are expected." << std::endl << std::endl;

  CANJaguar jaguar(TestBench::kCANJaguarID);
  EXPECT_EQ(wpi_error_value_ResourceAlreadyAllocated,
            jaguar.GetError().GetCode())
      << "An error should have been returned";
}

/**
 * Test that allocating a CANJaguar with device number 64 causes an
 * out-of-range error.
 */
TEST_F(CANJaguarTest, 64OutOfRangeError) {
  std::cout << "The following errors are expected." << std::endl << std::endl;

  CANJaguar jaguar(64);
  EXPECT_EQ(wpi_error_value_ChannelIndexOutOfRange, jaguar.GetError().GetCode())
      << "An error should have been returned";
}

/**
 * Test that allocating a CANJaguar with device number 0 causes an out-of-range
 * error.
 */
TEST_F(CANJaguarTest, 0OutOfRangeError) {
  std::cout << "The following errors are expected." << std::endl << std::endl;

  CANJaguar jaguar(0);
  EXPECT_EQ(wpi_error_value_ChannelIndexOutOfRange, jaguar.GetError().GetCode())
      << "An error should have been returned";
}

/**
 * Checks the default status data for reasonable values to confirm that we're
 * really getting status data from the Jaguar.
 */
TEST_F(CANJaguarTest, InitialStatus) {
  m_jaguar->SetPercentMode();

  EXPECT_NEAR(m_jaguar->GetBusVoltage(), kExpectedBusVoltage, 3.0)
      << "Bus voltage is not a plausible value.";

  EXPECT_FLOAT_EQ(m_jaguar->GetOutputVoltage(), 0.0)
      << "Output voltage is non-zero.";

  EXPECT_FLOAT_EQ(m_jaguar->GetOutputCurrent(), 0.0)
      << "Output current is non-zero.";

  EXPECT_NEAR(m_jaguar->GetTemperature(), kExpectedTemperature, 5.0)
      << "Temperature is not a plausible value.";

  EXPECT_EQ(m_jaguar->GetFaults(), 0) << "Jaguar has one or more fault set.";
}

/**
 * Ensure that the jaguar doesn't move when it's disabled
 */
TEST_F(CANJaguarTest, Disable) {
  m_jaguar->SetPercentMode(CANJaguar::QuadEncoder, 360);
  m_jaguar->EnableControl();
  m_jaguar->DisableControl();

  Wait(kEncoderSettlingTime);

  double initialPosition = m_jaguar->GetPosition();

  SetJaguar(kMotorTime, 1.0f);
  m_jaguar->Set(0.0f);

  double finalPosition = m_jaguar->GetPosition();

  EXPECT_NEAR(initialPosition, finalPosition, kEncoderPositionTolerance)
      << "Jaguar moved while disabled";
}

/**
 * Make sure the Jaguar keeps its state after a power cycle by setting a
 * control mode, turning the spike on and off, then checking if the Jaguar
 * behaves like it should in that control mode.
 */
TEST_F(CANJaguarTest, BrownOut) {
  /* Set the jaguar to quad encoder position mode */
  m_jaguar->SetPositionMode(CANJaguar::QuadEncoder, 360, 20.0f, 0.01f, 0.0f);
  m_jaguar->EnableControl();
  SetJaguar(kMotorTime, 0.0);
  double setpoint = m_jaguar->GetPosition() + 1.0f;

  /* Turn the spike off and on again */
  m_spike->Set(Relay::kOff);
  Wait(kSpikeTime);
  m_spike->Set(Relay::kOn);
  Wait(kSpikeTime);

  /* The jaguar should automatically get set to quad encoder position mode,
          so it should be able to reach a setpoint in a couple seconds. */
  for (int i = 0; i < 10; i++) {
    SetJaguar(1.0f, setpoint);

    if (std::abs(m_jaguar->GetPosition() - setpoint) <=
        kEncoderPositionTolerance) {
      return;
    }
  }

  EXPECT_NEAR(setpoint, m_jaguar->GetPosition(), kEncoderPositionTolerance)
      << "CAN Jaguar should have resumed PID control after power cycle";
}

/**
 * Test if we can set arbitrary setpoints and PID values each each applicable
 * mode and get the same values back.
 */
TEST_F(CANJaguarTest, SetGet) {
  m_jaguar->DisableControl();

  m_jaguar->SetSpeedMode(CANJaguar::QuadEncoder, 360, 1, 2, 3);
  m_jaguar->Set(4);

  EXPECT_FLOAT_EQ(1, m_jaguar->GetP());
  EXPECT_FLOAT_EQ(2, m_jaguar->GetI());
  EXPECT_FLOAT_EQ(3, m_jaguar->GetD());
  EXPECT_FLOAT_EQ(4, m_jaguar->Get());
}

/**
 * Test if we can drive the motor in percentage mode and get a position back
 */
TEST_F(CANJaguarTest, PercentModeForwardWorks) {
  m_jaguar->SetPercentMode(CANJaguar::QuadEncoder, 360);
  m_jaguar->EnableControl();

  /* The motor might still have momentum from the previous test. */
  SetJaguar(kEncoderSettlingTime, 0.0f);

  double initialPosition = m_jaguar->GetPosition();

  /* Drive the speed controller briefly to move the encoder */
  SetJaguar(kMotorTime, 1.0f);
  m_jaguar->Set(0.0f);

  /* The position should have increased */
  EXPECT_GT(m_jaguar->GetPosition(), initialPosition)
      << "CAN Jaguar position should have increased after the motor moved";
}

/**
 * Test if we can drive the motor backwards in percentage mode and get a
 * position back
 */
TEST_F(CANJaguarTest, PercentModeReverseWorks) {
  m_jaguar->SetPercentMode(CANJaguar::QuadEncoder, 360);
  m_jaguar->EnableControl();

  /* The motor might still have momentum from the previous test. */
  SetJaguar(kEncoderSettlingTime, 0.0f);

  double initialPosition = m_jaguar->GetPosition();

  /* Drive the speed controller briefly to move the encoder */
  SetJaguar(kMotorTime, -1.0f);
  m_jaguar->Set(0.0f);

  float p = m_jaguar->GetPosition();
  /* The position should have decreased */
  EXPECT_LT(p, initialPosition)
      << "CAN Jaguar position should have decreased after the motor moved";
}

/**
 * Test if we can set an absolute voltage and receive a matching output voltage
 * status.
 */
TEST_F(CANJaguarTest, VoltageModeWorks) {
  m_jaguar->SetVoltageMode();
  m_jaguar->EnableControl();

  float setpoints[] = {M_PI, 8.0f, -10.0f};

  for (auto setpoint : setpoints) {
    SetJaguar(kMotorTime, setpoint);
    EXPECT_NEAR(setpoint, m_jaguar->GetOutputVoltage(), kVoltageTolerance);
  }
}

/**
 * Test if we can set a speed in speed control mode and receive a matching
 * speed status.
 */
TEST_F(CANJaguarTest, SpeedModeWorks) {
  m_jaguar->SetSpeedMode(CANJaguar::QuadEncoder, 360, 0.1f, 0.003f, 0.01f);
  m_jaguar->EnableControl();

  constexpr float speed = 50.0f;

  SetJaguar(kMotorTime, speed);
  EXPECT_NEAR(speed, m_jaguar->GetSpeed(), kEncoderSpeedTolerance);
}

/**
 * Test if we can set a position and reach that position with PID control on
 * the Jaguar.
 */
TEST_F(CANJaguarTest, PositionModeWorks) {
  m_jaguar->SetPositionMode(CANJaguar::QuadEncoder, 360, 15.0f, 0.02f, 0.0f);

  double setpoint = m_jaguar->GetPosition() + 1.0f;

  m_jaguar->EnableControl();

  /* It should get to the setpoint within 10 seconds */
  for (int i = 0; i < 10; i++) {
    SetJaguar(1.0f, setpoint);

    if (std::abs(m_jaguar->GetPosition() - setpoint) <=
        kEncoderPositionTolerance) {
      return;
    }
  }

  EXPECT_NEAR(setpoint, m_jaguar->GetPosition(), kEncoderPositionTolerance)
      << "CAN Jaguar should have reached setpoint with PID control";
}

/**
 * Test if we can set a current setpoint with PID control on the Jaguar and get
 * a corresponding output current
 */
TEST_F(CANJaguarTest, DISABLED_CurrentModeWorks) {
  m_jaguar->SetCurrentMode(10.0, 4.0, 1.0);
  m_jaguar->EnableControl();

  float setpoints[] = {1.6f, 2.0f, -1.6f};

  for (auto& setpoints_i : setpoints) {
    float setpoint = setpoints_i;
    float expectedCurrent = std::abs(setpoints_i);

    /* It should get to each setpoint within 10 seconds */
    for (int j = 0; j < 10; j++) {
      SetJaguar(1.0, setpoint);

      if (std::abs(m_jaguar->GetOutputCurrent() - expectedCurrent) <=
          kCurrentTolerance) {
        break;
      }
    }

    EXPECT_NEAR(expectedCurrent, m_jaguar->GetOutputCurrent(),
                kCurrentTolerance);
  }
}

/**
 * Test if we can get a position in potentiometer mode, using an analog output
 * as a fake potentiometer.
 */
TEST_F(CANJaguarTest, FakePotentiometerPosition) {
  m_jaguar->SetPercentMode(CANJaguar::Potentiometer);
  m_jaguar->EnableControl();

  // Set the analog output to 4 different voltages and check if the Jaguar
  // returns corresponding positions.
  for (int i = 0; i <= 3; i++) {
    m_fakePotentiometer->SetVoltage(static_cast<float>(i));

    SetJaguar(kPotentiometerSettlingTime);

    EXPECT_NEAR(m_fakePotentiometer->GetVoltage() / 3.0f,
                m_jaguar->GetPosition(), kPotentiometerPositionTolerance)
        << "CAN Jaguar should have returned the potentiometer position set by "
           "the analog output";
  }
}

/**
 * Test if we can limit the Jaguar to only moving in reverse with a fake
 * limit switch.
 */
TEST_F(CANJaguarTest, FakeLimitSwitchForwards) {
  m_jaguar->SetPercentMode(CANJaguar::QuadEncoder, 360);
  m_jaguar->ConfigLimitMode(CANJaguar::kLimitMode_SwitchInputsOnly);
  m_fakeForwardLimit->Set(1);
  m_fakeReverseLimit->Set(0);
  m_jaguar->EnableControl();

  SetJaguar(kEncoderSettlingTime);

  /* Make sure the limits are recognized by the Jaguar. */
  ASSERT_FALSE(m_jaguar->GetForwardLimitOK());
  ASSERT_TRUE(m_jaguar->GetReverseLimitOK());

  double initialPosition = m_jaguar->GetPosition();

  /* Drive the speed controller briefly to move the encoder.  If the limit
           switch is recognized, it shouldn't actually move. */
  SetJaguar(kMotorTime, 1.0f);

  /* The position should be the same, since the limit switch was on. */
  EXPECT_NEAR(initialPosition, m_jaguar->GetPosition(),
              kEncoderPositionTolerance)
      << "CAN Jaguar should not have moved with the limit switch pressed";

  /* Drive the speed controller in the other direction.  It should actually
           move, since only the forward switch is activated.*/
  SetJaguar(kMotorTime, -1.0f);

  /* The position should have decreased */
  EXPECT_LT(m_jaguar->GetPosition(), initialPosition)
      << "CAN Jaguar should have moved in reverse while the forward limit was "
         "on";
}

/**
 * Test if we can limit the Jaguar to only moving forwards with a fake limit
 * switch.
 */
TEST_F(CANJaguarTest, FakeLimitSwitchReverse) {
  m_jaguar->SetPercentMode(CANJaguar::QuadEncoder, 360);
  m_jaguar->ConfigLimitMode(CANJaguar::kLimitMode_SwitchInputsOnly);
  m_fakeForwardLimit->Set(0);
  m_fakeReverseLimit->Set(1);
  m_jaguar->EnableControl();

  SetJaguar(kEncoderSettlingTime);

  /* Make sure the limits are recognized by the Jaguar. */
  ASSERT_TRUE(m_jaguar->GetForwardLimitOK());
  ASSERT_FALSE(m_jaguar->GetReverseLimitOK());

  double initialPosition = m_jaguar->GetPosition();

  /* Drive the speed controller backwards briefly to move the encoder.  If
           the limit switch is recognized, it shouldn't actually move. */
  SetJaguar(kMotorTime, -1.0f);

  /* The position should be the same, since the limit switch was on. */
  EXPECT_NEAR(initialPosition, m_jaguar->GetPosition(),
              kEncoderPositionTolerance)
      << "CAN Jaguar should not have moved with the limit switch pressed";

  /* Drive the speed controller in the other direction.  It should actually
           move, since only the reverse switch is activated.*/
  SetJaguar(kMotorTime, 1.0f);

  /* The position should have increased */
  EXPECT_GT(m_jaguar->GetPosition(), initialPosition)
      << "CAN Jaguar should have moved forwards while the reverse limit was on";
}
/**
* Tests that inversion works in voltage mode
*/
TEST_F(CANJaguarTest, InvertingVoltageMode) {
  m_jaguar->SetVoltageMode(CANJaguar::QuadEncoder, 360);
  m_jaguar->EnableControl();
  InversionTest(kMotorVoltage);
}

/**
* Tests that inversion works in percentMode
*/
TEST_F(CANJaguarTest, InvertingPercentMode) {
  m_jaguar->SetPercentMode(CANJaguar::QuadEncoder, 360);
  m_jaguar->EnableControl();
  InversionTest(kMotorPercent);
}
/**
* Tests that inversion works in SpeedMode
*/
TEST_F(CANJaguarTest, InvertingSpeedMode) {
  m_jaguar->SetSpeedMode(CANJaguar::QuadEncoder, 360, 0.1f, 0.005f, 0.00f);
  m_jaguar->EnableControl();
  InversionTest(kMotorSpeed, kMotorTime);
}