mirror of
https://github.com/wpilibsuite/allwpilib
synced 2026-06-22 01:11:42 +00:00
da6b8c7ae1
Split to match the new headers. Uses a namespace 'hal' for internal functions and globals. SPIAccumulator merged back into SPI header, as it was not a good split. Analog accumulator will move back to analog input when the analog split is done.
74 lines
2.5 KiB
C++
74 lines
2.5 KiB
C++
/*----------------------------------------------------------------------------*/
|
|
/* Copyright (c) FIRST 2016. All Rights Reserved. */
|
|
/* Open Source Software - may be modified and shared by FRC teams. The code */
|
|
/* must be accompanied by the FIRST BSD license file in the root directory of */
|
|
/* the project. */
|
|
/*----------------------------------------------------------------------------*/
|
|
|
|
#pragma once
|
|
|
|
#include <stdint.h>
|
|
|
|
#include "ChipObject.h"
|
|
#include "HAL/Port.h"
|
|
#include "HAL/cpp/Resource.h"
|
|
|
|
namespace hal {
|
|
constexpr uint32_t kNumHeaders = 10; // Number of non-MXP pins
|
|
constexpr uint32_t kDigitalPins = 26;
|
|
constexpr uint32_t kPwmPins = 20;
|
|
|
|
constexpr uint32_t kExpectedLoopTiming = 40;
|
|
|
|
/**
|
|
* kDefaultPwmPeriod is in ms
|
|
*
|
|
* - 20ms periods (50 Hz) are the "safest" setting in that this works for all
|
|
* devices
|
|
* - 20ms periods seem to be desirable for Vex Motors
|
|
* - 20ms periods are the specified period for HS-322HD servos, but work
|
|
* reliably down to 10.0 ms; starting at about 8.5ms, the servo sometimes hums
|
|
* and get hot; by 5.0ms the hum is nearly continuous
|
|
* - 10ms periods work well for Victor 884
|
|
* - 5ms periods allows higher update rates for Luminary Micro Jaguar speed
|
|
* controllers. Due to the shipping firmware on the Jaguar, we can't run the
|
|
* update period less than 5.05 ms.
|
|
*
|
|
* kDefaultPwmPeriod is the 1x period (5.05 ms). In hardware, the period
|
|
* scaling is implemented as an output squelch to get longer periods for old
|
|
* devices.
|
|
*/
|
|
constexpr float kDefaultPwmPeriod = 5.05;
|
|
/**
|
|
* kDefaultPwmCenter is the PWM range center in ms
|
|
*/
|
|
constexpr float kDefaultPwmCenter = 1.5;
|
|
/**
|
|
* kDefaultPWMStepsDown is the number of PWM steps below the centerpoint
|
|
*/
|
|
constexpr int32_t kDefaultPwmStepsDown = 1000;
|
|
constexpr int32_t kPwmDisabled = 0;
|
|
|
|
// Create a mutex to protect changes to the DO PWM config
|
|
extern priority_recursive_mutex digitalPwmMutex;
|
|
|
|
extern tDIO* digitalSystem;
|
|
extern tRelay* relaySystem;
|
|
extern tPWM* pwmSystem;
|
|
extern hal::Resource* DIOChannels;
|
|
extern hal::Resource* DO_PWMGenerators;
|
|
extern hal::Resource* PWMChannels;
|
|
|
|
extern bool digitalSystemsInitialized;
|
|
|
|
struct DigitalPort {
|
|
Port port;
|
|
uint32_t PWMGeneratorID;
|
|
};
|
|
|
|
void initializeDigital(int32_t* status);
|
|
void remapDigitalSource(bool analogTrigger, uint32_t& pin, uint8_t& module);
|
|
uint32_t remapMXPPWMChannel(uint32_t pin);
|
|
uint32_t remapMXPChannel(uint32_t pin);
|
|
}
|